|
|
|
|
|
|
|
| |
| 16-Aug-2024 | |
The original seat supports were cut with a curve from a band saw. Not having one, I decided to approximate the slopes (but not the curves) of each part, cutting them by hand on the table saw. I then used the table saw to cut the slot in each new piece to create the lap joint to connect each pair of pieces. Then I painted them and bolted them together.
| Full EXIF Info | |
| Date/Time | 16-Aug-2024 18:59:29 |
| Make | |
| Model | Pixel 4a |
| Flash Used | No |
| Focal Length | 4.4 mm |
| Exposure Time | 1/120 sec |
| Aperture | f/1.7 |
| ISO Equivalent | 332 |
| Exposure Bias | 0.00 |
| White Balance | 0 |
| Metering Mode | center weighted (2) |
| JPEG Quality | |
| Exposure Program | program (2) |
| Focus Distance | 0.664 m |
All images copyrighted: © Steven P. Davis; all rights reserved.