|
|
|
|
|
|
|
| |
| 13-NOV-2008 | |
Below the starter you see a dangling wire. This was hooked to the low oil sensor at one time. The sensor died, so I just unhooked it.
The pipe flange that connects the muffler with the pipe needed to be faced off in the lathe, as it was too rough to seal anything. A thick exhaust gasket should work though.
| Full EXIF Info | |
| Date/Time | 13-Nov-2008 12:57:04 |
| Make | Nikon |
| Model | E7600 |
| Flash Used | No |
| Focal Length | 14.9 mm |
| Exposure Time | 1/47 sec |
| Aperture | f/3.7 |
| ISO Equivalent | 50 |
| Exposure Bias | 0.30 |
| White Balance | |
| Metering Mode | matrix (5) |
| JPEG Quality | |
| Exposure Program | program (2) |
| Focus Distance | |
| comment | |