This old format has run its course and the new site is now up and running. Articles here will no longer be kept current, or up to date. Eventually this site will go the way of the buggy whip. If you see this "WARNING" image, the article has been moved, updated and may have more added to it than you will find below.
IMPORTANT: If the first image of the article below features strikethrough; strikethrough it means updates or edits have been made and I am urging you to visit the new site for more current information.
Please change your bookmarks and please visit the new site. See new links below.
These are solar MC4 connectors the FEMALE on the bottom and the MALE plug on top.. Today more and more solar panels are shipping with MC-4 terminals and less and less with actual junction boxes. I still personally prefer a water tight j-box, and water tight gland nut, but not all panels ship that way.
The MC4 solar connectors are UL rated for 600V and up to 50A of maximum current. They also range from IP65 to IP68 rated (depends upon brand) which means they are fully "dust & water jet tight" (IP65) and can be submersed to 1 meter for 1 hour and still retain water resistance (IP68). The MC4 connectors are available in 14, 12, 10 & 8GA sizes.
They work quite well but on boats, but if not carefully installed, they can be a tad bulky and prone to being caught on things. That said, they are one of the better water tight electrical connections available for marine use. You don't have to use them only on solar connections and they could certainly be used for other applications.
Like any other project on boats this project will add yet another tool to your tool box.
11-MAY-2013
MC4 FEMALE / + Positive
These are the individual pieces of the FEMALE MC4 connector:
From Left to Right:
-Compression Nut
-Gland Compressing Ring
-Water Tight Sealing Gland
-MC4 FEMALE Crimp Terminal
-MC4 FEMALE Plug Body
11-MAY-2013
MC4 MALE / - Negative
These are the individual pieces of the MALE MC4 connector:
From L to R:
-Compression Nut
-Gland Compressing Ring
-Water Tight Sealing Gland
-MC4 MALE Crimp Terminal
-MC4 MALE Plug Body
11-MAY-2013
FEMALE & MALE
The FEMALE terminal on the left is ready to connect to the MALE terminal on the right.
11-MAY-2013
Insert FEMALE into MALE
I know it is confusing, the FEMALE vs. MALE with MC4's, because the one on the left clearly looks like a MALE and the one on the right clearly looks like a FEMALE.
The terminology relates to the crimp terminals inside the plugs not the body of the plugs. The plug on the right has the small male "pin" and the plug on the left has the FEMALE barrel/receptacle.
11-MAY-2013
Press & Snap Closed
You just press them together until the "snap" closed.
11-MAY-2013
MC4 Assembly & Dissasembly Tool
These are the MC4 assemble and disassemble tools. They are inexpensive and worth having especially for taking the terminals apart after they have been closed.
11-MAY-2013
MC4 Crimp Dies
OK here's where the extra tool cost comes into play. You will need a crimp tool for these terminals. However, as usual, I have located a very good value in an MC4 crimping tool (not the tool pictured). A pro who does this every day for a living would not use this tool because it is more tedious and time consuming than the more expensive pro-grade versions, which utilize a locator assembly,but for the money this tool preforms very, very well.
In full disclosure I imported a reasonably priced MC4 die set and crimping frame from Taiwan and while the dies are not pro-level you're not paying pro level pricing either. The tool represents a decent value for the budget minded boater at $46.95 (CURRENTLY ON SALE FOR $36.00).
Like a D-Sub style crimp tool the MC4 dies make a "B" or "butt-cheek" type crimp. The pictured die set is sized for 10, 12 & 14 AWG wire as well as 2.5 mm˛, 4 mm˛ and 6 mm˛ wire.
11-MAY-2013
Strip Outer Jacket From Cable
I will sometimes use a two conductor untinned round cable such as an SO type wire for the external connections to the solar panel but most often a tinned marine grade wire.. Inside these terminals the tinned wire is not as critical as with open style crimps. I almost always use 10/2 or 8/2 wire from the panel to deck if using MC4's. Once through a deck gland and into the vessel you can switch to a larger GA wire to minimize voltage drop.
Here I have stripped back the outer jacket of the wire exposing the inner 10GA conductors.
11-MAY-2013
Slide Heat Shrink Over Cable
To give the wire a nice finished look and feel I slide some heat shrink over the wire before I install the terminals.
11-MAY-2013
Slide MC4 Parts Over Cable
Next, slide on the compression nut, compressing clamp and watertight seal in this order.
*******CLICK BELOW FOR PAGE TWO*******
11-MAY-2013
Strip The Wire
Now strip back about 1/4" +/- of wire being very careful not to damage any strands.
11-MAY-2013
Check Your Strip Depth
Insert the stripped wire into the crimp terminal and check your strip depth.
I prefer to have the stripped wire extend into the barrel of the terminal a bit so it does not "fan out" when crimped and create issues when inserting it into the plug.
11-MAY-2013
Insert Terminal Into Crimp Tool Dies
Now you're ready to place the terminal into the crimp tool dies. The open end of the terminal faces up towards the "butt cheeks" so it can be rolled over and formed to execute the crimp.
It helps to compress the crimp frame a couple of clicks. This will hold the terminal as shown and you can then insert the wire and finally squeeze the handle to complete the crimp.
11-MAY-2013
Crimped Terminal
Even non pro-level MC4 crimp tools can make a nice strong crimp. This picture illustrates why I like to see the stripped wire extend into the barrel slightly. If it does not extended into the barrel of the terminal it can "fan out" and make inserting it into the plug difficult.
11-MAY-2013
Insert Terminal Into Plug
Once you've crimped the wire to the terminal you can then insert the terminal into the MC4 plug body.
11-MAY-2013
Press Until It Clicks
Keep pressing the crimped terminal into the plug body until you feel it "click" into place. With some MC4 terminals this is less obvious than with others.
Don't worry about mixing up the terminals and plug bodies because male & female pins will not fit into the wrong plug bodies.
Bear in mind that solar panels ship with the female plug shown here, marked +, on the positive output lead from the solar panel. This means the positive wire on your boat will get the corresponding male plug not another female plug..
11-MAY-2013
Slide Sealing Gland Into The Plug Body
Once the terminal has been clicked into place slide the sealing gland and compression gland up the wire and into the plug. The gray colored sealing gland (not all brands use gray) should be "in" the terminal as shown here.
11-MAY-2013
Thread On Compressing Nut & Tighten
Thread the nut on finger tight then snug it up, as shown, using the MC4 tool.
11-MAY-2013
Finished MC4 Plug
Here's a finished MC4 connector.
Good luck with your project!
MAY-2006
Help Support This Site
Like what you saw or read in this article? Was it helpful? Could the information save you some money? Would you like to see more articles like this?
If so feel free to donate, support the site, and keep it growing. Please DO NOT feel obligated at all. If you like it and want to make a donation, please do. Your donations help keep the content coming and also help keep it FREE.
Click the DONATE button below if you would like to make a donation via PayPal.
