![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
After cutting the aluminum to the pattern that I made I took the pieces to a friends shop to use his brake to bend it all up. Unfortunately since I don't use his manual brake very often I make a slight mistake in my bends and my overall width was about 1/8" too wide. I ended up having to cut the whole piece in half, taking 1/8" off the halves, then welding them back together.
I installed nutserts on top to mount the console to some brackets that I'll weld to the cage. I then installed nutserts to hold on the face plate.
Full EXIF Info | |
Date/Time | 26-Oct-2013 14:39:00 |
Make | Canon |
Model | Canon EOS 5D Mark II |
Flash Used | No |
Focal Length | 42 mm |
Exposure Time | 1/250 sec |
Aperture | f/5.6 |
ISO Equivalent | 100 |
Exposure Bias | |
White Balance | |
Metering Mode | |
JPEG Quality | |
Exposure Program | |
Focus Distance |
All Images share copyright of "Pixels to Images ". Contact owner for permission of use.