photo sharing and upload picture albums photo forums search pictures popular photos photography help login
Type your message and click Add Comment
It is best to login or register first but you may post as a guest.
Enter an optional name and contact email address. Name
Name Email
help private comment
Kwokwai Wu | profile | all galleries >> Gear Gallery >> Airsoft >> Head KM SCS Install tree view | thumbnails | slideshow

Head KM SCS Install

Here's a basic step-by-step install of a Head KM SCS barrel on a Coksai/Kokusai M16A2. I basically followed the instructions (scans at the end) and did the best with my meagre abilities to not mess it up. One thing that was required before starting was to drill a small hole into the barrel mount piece which you can see in the fourth photo to allow adjustment of the hopup without being required to tear it down completely. If I've made any mistakes please let me know and I'll update appropriately. I ask this as I still haven't had the chance to properly test this out yet. Thanks.

Dedicated to Sparky.
previous pagepages 1 2 3 ALL next page
All the parts that I had available to me prior to starting
All the parts that I had available to me prior to starting		 The SCS barrel parts out of the box
The SCS barrel parts out of the box		 A close up of the small bits
A close up of the small bits		 Barrel mount. Note the small hopup adjust hole that had to be drilled
Barrel mount. Note the small hopup adjust hole that had to be drilled
Side view with the rear brass mount portion of the SCS
Side view with the rear brass mount portion of the SCS		 Inner barrel bottom view
Inner barrel bottom view		 Inner barrel top view, note hopup adjust
Inner barrel top view, note hopup adjust		 Side view with inner barrel in position
Side view with inner barrel in position
c-clip that must be installed to keep spring in position
c-clip that must be installed to keep spring in position		 c-clip installed
c-clip installed		 Recoil spring now added
Recoil spring now added		 Outer barrel now in place; keep watch for position of screw holes
Outer barrel now in place; keep watch for position of screw holes
previous pagepages 1 2 3 ALL next page

comment | share
click on thumbnails for full image