This baby is a beauty.
took apart and cleaned a few parts. only real issue is someone use an aluminum pin for the trigger pin and made for a sticky trigger.. so I replaced the pin and really worked it over cause it works like an eblade, the pin secures to the trigger and rotates in the frame.. but now matter how much I polished the pin and hole but when I tighten the trigger set screw it made the trigger stick. So I flattened one end of the trigger pin so it had to be tapped in like an oldschool pin and it works like a charm.
tuned, timed, sweetspotted, and chroned.
replaced 3 way orings, was very leaky


Kmac