Content author-Key Morsing

Simple plumbing issues can not only hurt the image of your home but they can destroy your wallet. Simple things from clogged drains, to more advanced leaks can be incredibly destructive. Don't fret however! With a few essential tips for the do it yourself home plumber, you will be ready to take care of any issue.

Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

Wait until a job is done before you pay for it. You may need to make a small down payment before the job has begun, but you never want to pay the entire amount until you are certain the job was completed to your satisfaction. You need to know the plumber did what he promised before he is reimbursed for the entire amount.

A great tip to use to stop your septic tank from backing up is to make sure you have it pumped at least every five years. This will keep sediment from building and causing backup into the house, and possibly causing the septic system to fail. While it may cost a bit to have your septic tank pumped out, it will cost you much more to clean up any sewage backup or to repair or replace your septic tank.

If your water is coming out black, then most likely you have an iron and magnesium issue to your water. You need to contact a water softener company, and get them to come out and assess your water. They will be able to fix the problem by adding a water softener.

Don't start any do-it-yourself plumbing project without having a plan in place. You need to know beforehand exactly what you are getting yourself into. Know what kind of space you are working with and what lines are which. Getting a clear picture early on will make your plumbing project go a lot smoother!

Make Read the Full Write-up are cleaned out. This can help to prevent any water damage. Overflow holes are a way to stop water from overflowing if a sink is left on by accident. If the overflow hole is clogged it will not be able to do its job.

To prevent pipe banging when you turn on the water, think about rubber blankets or straps. Instead of assuming the pipes need replaced, consider anchoring them or buffering them. If your pipes are plastic, leave them some room for expansion and contraction. If pipes do not leak but just make noise, eliminate the noise.

Avoid using harsh chemicals to clear clogged drains by purchasing a hand-held manual auger. A drain auger is a one-time purchase as opposed to purchasing a new bottle every time a drain is clogged. This is especially helpful for people who deal with clogged drains often, such as people with long hair or kids who like to drop things down the drain.

Some people have problems with their plumbing system in that the pipes sweat and drip condensation. You do not have to hire a plumber to take care of this nuisance. You can purchase self-adhesive drip tape from your local hardware store. This drip tape will insulate your "sweating" pipes which are dripping with moisture built up from condensation. To make sure the tape sticks firmly, dry the pipe thoroughly before applying the tape.





Research potential plumbers before hiring one. Some plumbers are not trained to take on certain tasks, and can end up making your problem much worse. Make sure to look at any online reviews, or ask for a referral from a friend or family member.

The key to finding a great plumber for new construction is to look at their prior jobs. Good plumbers take pride in the work they do, so they will have photos and references from previous jobs. If the plumber you are considering hiring does not have references or photos of previous jobs, then stay away and find another.

Check for standing water in your yard which can be a direct result of leaking pipes. Standing water can cause an increased level of damage to your lawn and will attract bacteria and insects. Reduce your level of standing water to put your family and home in the most secure position.

Do not pour grease and oil down your drains. Cooking grease will build up in your pipes and could cause back-ups. Keep grease and oil in a container in your fridge and throw it in the trash when it is full. Avoid clogging your pipes with any products containing oil or grease.

If you are the kind of person who travels a great deal, then remember that different countries may have very different kinds of plumbing systems available. If you are not sure of how things work in the region where you experience problems, then you should either do research or avoid fixing the problem yourself.

Teach your children how to notice plumbing problems. Many parents handle plumbing issues without sharing that information with their children, who grow up not knowing anything about plumbing. Any time you make a small repair or notice a problem, call your kids in and explain what the problem is and what you are going to do. Educate them so they can make good decisions in the future.

If you are going to update the plumbing in your house, one thing to consider is installing a new tank-less water heater. They are much smaller than traditional tank heaters, which is a space-saver. Tank-less water heaters are available in gas or electric, depending on what your house needs.

To prevent exposed pipes under your home from freezing during the winter, use foam pipe insulation or electric heat tape to cover your pipes according to the manufacturer's directions. Suggested Webpage can cause damage and high water bills, so preventing freezing and bursting is essential during the coldest months of the year.

Doing your own plumbing can be very rewarding, but it can also be a lot of work. Regardless, if you know what to do and how to do your plumbing properly. So, do yourself a favor by doing your research and applying these tips to your home plumbing endeavors.