Content author-Krebs Lancaster

Fixing your own plumbing can be a difficult and intimidating thing to try. There are so many things to know, and it seems like it could be easy to accidentally break something and make the problem worse. However, taking care of common plumbing problems can be easy with the proper knowledge. Read on for some practical tips on solving and avoiding plumbing issues.



Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

Avoid the bursting of pipes due to the change in the temperature. You need to allow the flow of heat to reach under the sinks and into the pipes, you have to keep the cabinet doors of the bathrooms and kitchens open. It is important to keep water running at both hot and cold faucets along with vanities that are in close proximity to exterior walls.

Always keep your garbage disposal clean. You can do this in many ways. Pour some dish soap in and let the disposal run for a few minutes with some cold water. Be sure to run it regularly, if not, it can cause rust. To eliminate foul odors, grind lemon or other citrus peels. You can clean the walls of the disposal by grinding small fruit pits or egg shells.

Check how well your toilets are flushing. If the handle needs to be played with in order to keep the water from running constantly, or if it needs to be held down several times in order to flush, you may need to switch out some of the parts in your tank. This is not expensive, and it could help reduce your monthly water bill. It could also mean that you avoid the embarrassment of the flushing system breaking when you have visitors!

Many people wonder where the fruit flies are coming from. Each plumbing fixture has a self-sealed reserve that holds about two cups of water. If those pipes are broken or do not seal off, then odors and residue can cause fruit flies. It is recommended before anything to clean your pipes using bleach. If the flies come back, contact a professional.

Don't start any do-it-yourself plumbing project without having a plan in place. You need to know beforehand exactly what you are getting yourself into. Know what kind of space you are working with and what lines are which. Getting a clear picture early on will make your plumbing project go a lot smoother!

Prevention will save you money in plumbing bills. The repairs that plumbers perform the most are for drains that are clogged. One major thing that causes clots is grease. It builds up over and time. You can help prevent grease build up by looking for a product on the market that will clean the grease out.

If Drain Cleaning Plumbers have to take out a clean-out plug but you aren't having any success, two ways can assist you in doing this. The first method is by using a chisel and hammer to try to loosen the fitting. Another option is chiseling through the relevant clean out plug.

If you have an odor coming from one or more fixtures in your house, it is likely this has to do with the water in water traps. Each fixture has a water trap that is sealed off to prevent odors. If the water evaporates, the odors can surface. Therefore, try adding water to the traps.

Sometimes kitchen sinks can be clogged up due to a slow accumulation of solidified grease. One quick fix for this is to try pouring very hot grease down the sink, which will liquefy the grease clogging the drain and carry it down. Water won't work, because grease will not dissolve in water.

Regular maintenance of your plumbing lines is a great idea. Your options are getting your lines snaked or jetted. Jetted is a technology that is proven more effective than snaking is. It gets deeper and cleans harder. So jetting is a good idea next time you are having maintenance performed on your lines.

If you have an ice maker or other plumbing going to your refrigerator, every six months or so pull the refrigerator away from the wall and inspect this plumbing. There should be no condensation or corrosion on these plumbing lines, if there is, contact a plumber and have them look at it.

Beware of black water in your toilet tank. Chances are, the color is caused from too much magnesium or iron in your water. Although this is usually harmless, it can be annoying for some people. If it is iron or magnesium in your water, the only way to fix it is by filtering the water.

The water heater in your home needs to have regular flushing to its plumbing in order to work properly. There is usually a valve at the bottom of the water heater that a hose can be attached to. Connect a hose to this valve and open it up all the way to flush scale and deposits out of the system.

Be sure to have a running toilet fixed as soon as you can. Having a running toilet uses more water, which raises your water bill. To fix it yourself, you just have to find out what the problem is and buy the supplies you need. If you can't fix it yourself, call a plumber.

50 Gallon Commercial Water Heater Ao Smith is imperative as a homeowner that you know exactly where your main water shut-off valve is located and can operate the valve in case of an emergency. The best first step measure for frozen pipes is to stop water from entering your home in the first place. Locate the main water supply valve and turn it on and off on a regular basis to keep it easily operable in an emergency.

Tank-less water heaters are a great space saving alternative to traditional tank units. They are available in many models, some for indoors and some models are capable for outdoor mounting. Tank-less water heaters are known as great money savers when it comes to your water bill.

Every so often you should check your toilet for leaks. A good way to check for leaks would be to put food coloring, Kool-Aid, or even coffee in the tank, anything that will color the water will work. You should check your toilet bowl in a little bit, and if there is color in the bowl, your toilet is leaking and the stopper and/or flush valve may need changed.

As you can see, plumbing problems don't have to be so difficult. If you can solve the problem yourself, you can save time waiting for a plumber, as well as saving a whole lot of money. Try applying what you've learned from this article next time you have a plumbing problem!