Content by-Potter Phelps

How would you like to check out some expert tips on plumbing? You know a little bit about the basics but want to know what else you can do without having to pay a lot of money to hire somebody. Use the great advice in this article to further your knowledge.

Before you start a plumbing project you should tighten all of the pipes that are easily accessible. Especially if your pipes are making a range of loud banging sounds, as this is a clear sign that there are loose pipes along the line. It is also a good idea in case there is a clog so the excess pressure released does not break a loose pipe.

To help you repair a leaky water line, you should hire a plumber. A leaky water line can be a problem because it could lead to a flood. The best way to fix this problem is to hire a licensed plumber who is trained to repair the leak.

On very cold winter nights, allow your faucets to trickle slightly, especially if your pipes are located in a crawlspace. The running water prevents the pipes from freezing as quickly as they would otherwise. You can catch the water and use it for other household needs to prevent wasting it.




Many people deal with clogged toilets. However, if your toilet will not flush every time, the water rises to the top, and there is bubbling effect occasionally, this can be due to a much deeper blockage in the main pipe. The main pipe must then be cleaned in order for your toilet to work properly.

Use strainers in all drains to catch hair and other objects. This will prevent all the material from going down the drain and causing a clog, which can cause a bigger problem down the line. Clean out the strainers daily so that you don't start getting backup of water in your sink or tub.

To limit toilet problems, don't use it as a trash can. Nothing should be flushed down the toilet except human waste and toilet tissue. Flushing sanitary napkins, diapers, disposable napkins, and other materials is a sure recipe for a clogged drain and a backed-up toilet. As well, use just enough toilet paper to clean yourself!

Cleaning an aerator can remove sediment buildup that causes low water pressure. A small brush (an old toothbrush is ideal) dipped in vinegar will do a great job on the aerator after it's been removed and disassembled. Rinse off the aerator then reassemble and reattach to the faucet. That should help raise water pressure, as any aerator obstacles will be gone.

Make sure to clean your dryer's lint trap. This not only prevents fires, but saves money. Inspect your lint trap every so often for tears or holes that could cause lint to go into your pipes, this could cause clogs or other problems you will have to deal with.

If your home uses well water and orange or pink stains become noticeable in your bathtub or in other fixtures, this occurs when the water has too much iron. A water softener will take care of the issue. This can either be done by yourself, or you can hire a professional to come and take care of.

DIY plumbing jobs will require that you understand how to solder copper for the lines for the water supply. You can practice this skill so that you will be able to run your lines without worrying about it leaking. Search online for video tutorials that can help you get a handle on how to go about soldering.

The key to finding a great plumber for new construction is to look at their prior jobs. Good plumbers take pride in the work they do, so they will have photos and references from previous jobs. If the plumber you are considering hiring does not have references or photos of previous jobs, then stay away and find another.

A pipe snake might solve the problems of an overflowing washing machine. Sometimes lint and small things from the machine will build up and make it back up.

Using a snake tool to remove blockages is very easy. Just insert the tool a few inches into the drain, and then turn the handle to change the direction of the snake head and search for blockages. Continue moving down slowly and searching until you find the cause of your blockage.

pop over to this site is a general rule of thumb that you should replace a water faucet every seven years, even if you do not see anything wrong with it. Some faucet problems are not visible to the naked eye, which is why it is so important for them to replaced every so often.

If you have plumbing that runs into your refrigerator, you should be sure to shut it off if you are leaving on vacation. You do not want a leak to develop while you are away and leak all over your home. It will only take a minute to avoid what can be a disastrous situation.

Do a routine check around your house each month on each and every faucet to make sure there are no signs of leaks or drips. Over time, leaks can add a lot of money to your water bill and will worsen if you do not take care of the problem.

Infrequently used valves can stiffen with age and become inoperable. Maintain the water valves every so often with a qualtiy penetrating oil, turning each of them every now and then to prevent them from sticking.

Hopefully this article helped you learn a little bit more about your plumbing and how to stop issues before they start. By learning and knowing, like was discussed in this article, you can be sure to save a few dollars every year. Plumbing disasters can cost a lot of money, so use this advice well!