Examine This Report about Wedge Anchors - ThunderStud® Wedge Anchors

Our site requires Java, Script. Please allow it in your browser. To put an order, email us or call (630) 833-0300.

Red Head 2-3/4-in x 1/2-in Wedge Anchors in the Concrete Anchors department at Lowes.com

Zinc Plated 10 1. 9 lbs 483207 To position an order, please login or register.

Underwriters Laboratories (UL) Listed, EX2224( N) NY Board of Standards and Appeals, Satisfies or surpasses U.S. Federal government G.S.A. Specifications FF-S-325, Group II, Type 4, Class 1Zinc Plating adheres to QQ-Z-325C and ASTM B633-78 requirements, Galvanized studs, nuts, and washers comply with ASTM A153: Zinc Covering (Hot Dip) on Iron and Steel Hardware.

How to anchor things to concrete and masonry using a wedge anchor, Concrete wedge anchors are utilized to secure or protect various examples to concrete and masonry. Wedge anchors, also referred to as expansion bolts and expansion anchors, secure themselves to concrete using a mechanical wedging effect at the end of the anchor.

Our Wedge Anchors - CopperState Ideas

Thank you for supporting this site!! After a hole is drilled into the concrete, the Hilti wedge anchor is used the hole. The tightening of the bolt leads to a wedge being driven up against a sleeve which jams the end of the bolt into the concrete, supplying the strength.

1. Drill a hole in the concrete utilizing a hammer drill and a carbide tipped masonry drill bit the same diameter as the wedge anchor. If Research It Here being secured is in place and being utilized as a template to find the hole for the wedge anchor, the mounting hole in the fixture should manage clearance for the universal wedge clip on the anchor stud.

Clear the hole of all debris, then place the wedge anchor through the hole in the fixture or straight into the concrete, and hammer it in to the drilled hole, ensuring that it is set up to the preferred depth. 3. Turn the nut by hand till the unit is "snugged up".

ITW Red Head 50305 Wedge Anchor 5/8 By 8-1/2 Inch Hex Head Single (092097503052-1)

Strong-Bolt 1/4 inx 2-1/4 inZinc-Plated Wedge Anchor (25-Pack

To determine the minimum anchor length needed, simply add minimum embedment, plus component density, plus the density of the nut and washer. The wedge anchor needs no maximum hole depth. The depth of the hole in the concrete must be the length of the wedge anchor minus the density of the material being fastened.