For the professional woodworker, the miter gauges is a must-have tool. Used for almost every type of woodworking project, the miter gauge allows the woodworker to make accurate cuts that will help the project to finish and hold up over time. The miter gauge is used when joining two boards that are at different angles. The angle between the two boards can determine if the joint will slip or not.

The process of measuring the angle by simply using a miter gauge is fairly simple. With nothing more than the standard equipment that comes barebones, you are able to do all the necessary cuts needed to complete an endless number of projects and woodworking projects: With the miter gauge you are able to cut ninety degrees for picture frames and small boxes and cases, ninety-five degrees for standard furniture, and even ninety-five degrees for cabinet framing. With the accuracy that it provides, it is no wonder that the miter gauge has become a staple in the woodworking community. The saw blade is used to cut the boards that are to be joined, which help to keep the angle consistent. The fence is built from the appropriate angle, and the blade and fence are attached with clamps.

The miter gauge allows the builder to make precise angled cuts for everything from picture frames to small cabinets. This accuracy allows the builder to make any necessary modifications to the project without having to worry about a possible miscalculations when making the cuts. There is no need to worry about a rounded edge on the table saw blade, because the fence built with the miter gauge allows it to perfectly match the table saw blade.

A common problem that some people have with their crosscutting machinery is that the fence may not be perfectly square when it is installed. The miter gauge is a tool that helps the builder in making sure that the fence is perfectly square when it is used to crosscut boards. The miter gauge allows the operator to make precise angled cuts across the board to get the exact length that they want. If the crosscutting machine does crosscutting perfectly, then the angle of the blade will also be perfect.


Crosscutting is the process of ripping a board or piece of plywood into the precise dimensions that are needed to fit into a specific space. When the rip fence operator tries to crosscut a board, they will use a saw that has a diamond cross cutting blade that is typically at a forty-five degree angle. Most rip fences are built using steel or aluminum oxide, but some woodworkers prefer the natural element of wooden splices and knots.

The miter gauge can be used to help even out the blade angle on a rip fence. This will help the fence maker to create a fence that will cut faster and move more accurately across the wood. There are many other applications for the miter gauge. Many gardeners who like to cut flowers with a long handled hoe will also use the miter gauge to help them cut the stems evenly and close to the ground. It is also possible to use the miter gauge to help cut the stem of pine trees because it helps the cutter to get a closer shave at the cutting edge.

Many table saws that are built for the home have a miter gauge that is built into the table saw itself. Some table saws are sold with miter gauges as a built in feature, but many of these saws require the purchase of an attachment for use with miter cuts. This is usually an inexpensive improvement that will make woodworking more fun and less frustrating.

Miter gauges are an essential part of the construction process of many powered tools. Billious Inc. Distributor Because of their accuracy and speed, they are a very important part of working with a table saw. If you are having trouble making accurate cuts with your table saw, consider purchasing a jig saw that using a miter gauge as well as table saw miter gauges.