Article by-Flanagan Holden

Simple plumbing issues can not only hurt the image of your home but they can destroy your wallet. Simple things from clogged drains, to more advanced leaks can be incredibly destructive. Don't fret however! With a few essential tips for the do it yourself home plumber, you will be ready to take care of any issue.

Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

Make sure to pour a gallon or two of water into drains that are used infrequently. Not only does this make sure that they are clear when you need them, but can also fill the trap and make sure that unpleasant odors don't enter your home. Doing this periodically will also help you to catch problems before they become serious.

Do not fall for the idea that liquid grease can be easily washed down the drain with hot water. While the grease may flow past the initial drain with the water, it does not take much of a temperature change as it moves through your pipes to alter from liquid to solid. The repeat habit of dumping grease in the sink is a sure-fire way to ensure a hard-to-reach clog forming in the future.





Before you can fix a toilet that does not flush properly, it is important that you find out what is causing the problem. Depending on what the problem is, you may be able to fix it yourself. However, more complicated toilet flushing problems may require the services of a plumber.

You can check your toilet for leaks by adding a few drops of food coloring, Kool Aid or some coffee grounds to the water in the toilet's tank (not the water in the bowl). Check the water in the bowl after a half hour or so. If any of the coloring agent is visible in the water in the bowl, the tank is leaking, and you will have to have it repaired.

If water is not coming to the dishwasher, you most likely have a blockage somewhere. You will need to turn off the water supply and remove the hose that leads to the dishwasher. After securing the hose, turn the water back on. See if it feeds into a bowl. If not, then you must find the block where it is at which may include removing more piping.

Sometimes you have to make the choice between replacing or repairing. If you have an old appliance, that uses a lot of water or electricity, it may be best to replace. Sure, it will cost more initially, but it will save you money in the long run. The other thing is, you can't be sure how well a repair will work out, whereas with a new appliance you'll at least get a guarantee.

There are simple ways to check your toilet for leaks that can ultimately lead to great cost savings in the long run. The easiest way to do this is to pour a small amount of food dye into the holding tank of your toilet overnight. In the morning, if you have any color in the basin then you know you have a leak that needs some attention.

Regular maintenance of your plumbing lines is a great idea. Your options are getting your lines snaked or jetted. Jetted is a technology that is proven more effective than snaking is. It gets deeper and cleans harder. So jetting is a good idea next time you are having maintenance performed on your lines.

One of the ways that you can improve the functionality of your shower head is to clean the mineral deposits from the surface. Unscrew http://daily-nomad.com/news/happy-customer-gives-midwest-plumbing-indianapolis-a-grateful-five-star-review-detailing-the-experience/0279285/ and soak it in vinegar overnight. In the morning, brush off the deposits with a toothbrush to help the flow of water for your showers.

If you are using PEX tubing for the supply lines in your home, make sure you get the right tools for the job. PEX tubing requires a completely different tool type than regular lines. PEX has a lot of benefits though, so don't let the different requirements throw you off.

If your toilet is constantly developing moisture on the outside, you may want to consider turning up the heat in your bathroom. The biggest cause of "sweaty" toilets is cool and moist air. Believe it or not, this moisture could actually cause damage to your toilet, so it is crucial that you fix the problem.

To check for toilet leaks, especially if it seems like your toilet is chronically running, use a few drops of food coloring in the toilet tank. If water is leaking into the bowl, you will see color in about a half hour. Replacing tank parts can repair leaks and greatly save on water consumption.

Make sure that you avoid throwing fats down the drain after you clean up your meal. Fats can solidify over time which can cause a drainage problem and corrupt your water flow. Throw out fats and different types of cooking oils in the garbage after you finish with your meal.

When it comes to plumbing a great choice is to invest in brass fittings. Sure, they may be more expensive upfront, however their longevity is amazing compared to the alternatives, so you end up saving money. As an added bonus, the brass fittings look so much better than the other alternatives.

Plumbing choices can come in many ways. One decision you need to make as a homeowner is to purchase a tank-less water heater. One thing to remember if you are considering a tank-less heater. You will pay two to three times more than if you purchase a tank heater.

Use a product like BioBen if you are planning to leave your system shut off for a few weeks. Water will still remain in the pipes and could start smelling because it is not moving. This type of product will keep the water from stagnating and from smelling too bad.

In conclusion, you want to back yourself up as much as you can when it comes to taking care of plumbing issues. Use the details in this article to make sure that you know all of the ins and outs so that you can hopefully avoid having somebody else come out to take care of your issues.