Article written by-Randall Forsyth

Plumbing is a lot more that just fixing a leak under the sink. It is truly a huge system that needs to be maintained. It has so many techniques and equipment that require research and hard work. Do you have what it takes? Regardless of your answer, here are some tips to help you.

You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.

To winterize a house that will sit unused during the winter months, you must completely drain all of the pipes. After turning off the main water supply, let all of the water drain from the faucets, toilets, and water heater (turn off the gas). Add a quart of antifreeze to sinks and the tub to prevent water from freezing in the drain trap.

Got a leaky pipe? In many cases you can repair this yourself without the expense of a plumber. If a joint is leaking, tighten it with a pipe wrench. If the leak is coming from a damaged section of pipe, you can try repairing with a store-bought patching kit. One method involves applying waterproof tape to the section of pipe where there is leakage. Before applying the tape, make sure the pipe is thoroughly dry. Make sure that the tape covers two to three inches on either side of the breakage in the pipe.





Avoid the bursting of pipes due to the change in the temperature. You need to allow the flow of heat to reach under the sinks and into the pipes, you have to keep the cabinet doors of the bathrooms and kitchens open. It is important to keep water running at both hot and cold faucets along with vanities that are in close proximity to exterior walls.

If your sink is letting rusty water out and it will not drain, it is mostly likely because of the biological scum and grease that is built up in the pipes. You need to have your drains professionally cleaned, allowing maximum flow through your drains. Your drains must be open completely.

Make sure to pour a gallon or two of water into drains that are used infrequently. Not only does this make sure that they are clear when you need them, but can also fill the trap and make sure that unpleasant odors don't enter your home. Doing this periodically will also help you to catch problems before they become serious.

Watch how your toilets are flushing. If you have to jiggle the handle or if it takes too long, you might have to repair some toilet parts. Replacing these parts early may help you to save on your water bills and will save you from more expensive repairs at a later date.

If you have a toilet that is backing up, this can be from a blockage. When your personal efforts can't deal with such a clog, your only option is to have the line snaked out by a professional plumber.

Don't skimp on quality when it comes to replacing a shower head. There are some who think that low price is all that matters when buying fixtures for the bathroom. Inexpensive shower heads are not terribly sturdy, though, and may not hold up to daily use.

If you have drains in your house that have not been used for a long period of time, pour one gallon of water through them to keep them functional. Furthermore, this will have the added benefit of reducing any odors from entering your house from lack of use during the year.

In any DIY plumbing project, make sure that you always test the drains and the supply lines before you close up the walls. It is a lot easier to find and solve problems if you look for them while you are still in the process of actively doing the job.

Plumbing should only be done by professionals if there is a major problem or if you do not understand plumbing. Many of the big problems that plumbers deal with, actually have simple solutions. https://www.kansascity.com/news/politics-government/article242709326.html , who does not understand the intricacies of plumbing, usually end up compounding the problem by causing other costly damage to the house during the failed repair. The plumber will need to be called in the end, anyway.

If you have a water pressure or fill problem throughout the whole house, do not panic. It could be the simplest of solutions. Sometimes the city flushes their systems, breaking up debris and sending it to homes. This requires cleaning drains effectively and strainers in order to resolve the problem.

To avoid water damage to walls in the kitchen, make sure all seams in your counter tops and back splash are properly sealed using a waterproof silicone. Silicone will dry out over time, crack and shrink and should be replaced once every three years. Keeping your silicone in good shape will keep kitchen spills where they belong and not running down the walls.

Use a shop vacuum to unplug your toilets or drains, if a hard object is clogging it. Using a plunger will only push the object further and make it impossible to remove. If you do not have a shop vacuum, you can rent one from most Walmart stores or from similar franchises.

When you are going to do laundry in your home washing machine, do not use excess detergent, bleach or other chemicals. Too many of these products can cause the natural bacteria in your septic system to be killed. Just use enough of these products in order to get your laundry done.

In order to save both time and money, try to group your plumbing maintenance projects into one visit from the plumber. Fix everything that needs attention in one visit, rather than calling for service repeatedly. It will save money in the long run because you will not have to incur multiple service charges.

In conclusion, nobody wants to be caught off guard with plumbing issues especially in the cold winter time. Use the great advice in this article for some of the best ways to prevent pluming issues and stop them once they have started. Ideally, you will be able to understand the concepts provided here well enough to pass on to others.