Venetian Plaster NYC Plastering Contractor Fundamentals Explained

Remove all hangings and fixtures from the surface and fill any holes with spackling paste. Let the paste treatment according to the maker's guidelines, then gently sand the spackled areas with a 100-grit sandpaper. To get rid of the sanding dustalong with dirt, particles, and greasewhip up a basic cleaner by blending one teaspoon of liquid meal soap and 4 cups of warm water in a big bucket.

Venetian Plaster - NC Venetian Plastering

Once it dries entirely, cover the baseboards and the edges of the surface and ceiling with painter's tape. Next, tint the joint compound that will serve as the "plaster" in this Venetian plaster treatment. Combine one teaspoon of latex colorant per one gallon of pre-mixed joint substance in a large pail.

If you're looking for a regal Italian-inspired appearance, think about a latex colorant in a Mediterranean hue like terra cotta, lavender, or gold. Photo: flickr. com via Mark Nordgren, Don your dust mask, rubber gloves, and protective eyeglasses. Then scoop a generous load of tinted joint compound onto a hawk with an eight-inch drywall trowel.

FENICE - New Glossy Lime Venetian Plaster by San Marco – The Decora Company

You'll wish to start on top left corner and work your method down the surface up until it's entirely covered, regularly cleaning the edge of the trowel with a water-dampened rag to get rid of dried-up joint substance. Let Try This according to the manufacturer's guidelines (normally 24 hours), then gently sand the surface with 60- to 80-grit sandpaper.

Venetian Plaster Company - Home - Facebook Fundamentals Explained

After sanding, wipe down the wall with a water-dampened rag to get rid of sanding dust, then let the wall dry completely. To deepen the color variations in the joint compound, brush pre-tinted glaze over highlights (lighter areas) of the surface with a paintbrush. Utilize a pattern of x-shaped strokes as in the joint compound coat.

Venetian Plaster NYC Plastering Contractor - VenetianPlasterNYC.com

Alternately, if you seek the low-contrast look of limestone, select a glaze closer in hue (but still slightly darker than) the joint substance coat. When the glaze dries completely, you need to see the amazing effect of highlights and lowlights in color. Maintain the texture of your Venetian plaster surface by covering it with one coat of a clear water-based sealant using a roller.