My sand filter is running with high pressures

Follow the backwashing instructions within your Owner's Manual. The sand bed could possibly be clogged with mineral deposits that will not necessarily backwash away. Many calcium based chlorines and other alternate sanitizers will build up within your fine sand bed, and will demand more frequent backwashing and changing associated with the sand.

Before you replace all typically the sand in your filter, try eliminating approximately 1" involving the top level of the yellow sand, replace with the exact level of sand you removed. Normal life span with the sand is about 4 - five years.

You may well have to clean up your filter system using a special filtering cleaner, please contact Blue Haven Trust & Spas regarding more information.

Determine if there is definitely a closed or partially closed valve along your return piping, open typically the valve.

Your water pump may be also small to offer sufficient flow regarding proper backwashing. Your filter will performance, but a lower design flow level will cause your system to backwash improperly. Check the outcome with the pump to be sure that this equals your filter's design flow level. Replace the pump when it is too smaller.

My sand form of filtration is running found in short process

Inappropriate backwashing will be the explanation. Always backwash until the water works clear in the valve's sight a glass, usually about a couple of minutes.

You may well have live algae causing the filtration to clog. By testing the normal water balance having a test kit and very chlorinating, you need to resolve this problem.

There is sand at typically the bottom of the pool

The sand an individual are using may be too small, that will go through typically the filter system, well then back into typically the pool. Remove typically the sand and change it together with the suitable grade of crushed stone - #20 Silica or 45-55mm swimming pool sand.

Sandfilteranlage may be too large for your filtration system. During backwashing the particular pressure may cause the sand to increase substantial enough to overflow into the standpipe, allowing sand to be able to flow back in to the pool. Recommend to your User's Manual for typically the correct amount associated with sand to your filtering.

There could always be a loose spectrum of ankle located at typically the bottom of your filter. Tighten any kind of loose laterals, substitute if broken.

The majority of calcium based chlorine, both powder or perhaps tablets, contain coming from 30 - 35% of what will be called inert elements. This is calcium supplements residue or dust particles, which many pool area owners mistake with regard to sand. You could confirm this simply by following these steps: During vacuuming, make use of a hands vac and trellis. As the vac head approaches, typically the sand will lay on the bottom level, and will let itself to become indexed. Most calcium mineral residue will spread away from vac brain since you try in order to pick it up.