1, goblet cutting material: the original a glass is typically colorless drift glass or maybe other decorated glass, shading glass, toughened glass, laminated glass, typically the thickness is generally 3-12mm, these a glass must conform to this GB11614 first-class merchandise, outstanding product provisions, after passing the inspection can turn out to be used. A glass cutting can be done simply by hand or by machine, but it really should be guaranteed in order to meet the measurement specifications. In insulated glass manufacturer , this operator should always pay attention to the floor of the glass, not any scrapes, uniform endoplasm, zero bubbles, slag and different obvious problems.



2. A glass cleaning in addition to drying: Machine cleaning must be used for goblet cleaning, because manual washing cannot make sure the cleaning quality. The a glass must end up being inspected without nothing just before cleaning. In order to be able to assure the adhesive among sealant and glass, this is better to utilize deionized water. In addition, so as to ensure water recycling and save water resources, this particular can be strained to ensure long-term use. Following cleaning the glass to light evaluation, assessment wine glass surface together with or even without having water, water stains in addition to other stains, should there be normal water, water stains and other staining, you have the appliance working speed, heating temp, weather velocity, brush measurement adjustment, cleaning drying around order to achieve the most effective effect, wash and dried out the glass should turn out to be inside 1 time following assemble into hollow glass, in addition to ensure that the chaffing in between glass and glass don't scratch, possessed better have semi-finished goods store car a glass, stands between among glass in addition to peel.



3. Assembly regarding rubber material strip insulating goblet plus metal strip insulation a glass:



Rubber strip coating goblet assemblage:

(1) Ecological demands: The processing heat involving rubber strip preventive glass should be between 10-20 degrees in winter in addition to 20-30 degrees in summer season.

(2) Requirements of relatives wetness: Since the limpet type coating glass desiccant is in the kind of powder, and the desiccant has a slow function right after it is evenly mixed with this adhesive, the relative moisture connected with the adhesive strip construction area should be a little bit decrease.



Aluminum strip coating cup Assembly:

(1) Environment demands: The temperature need to also end up being between 10-30 degrees


(2) Relative humidity requirements: that insulating goblet has a slightly lower requirement for relative moisture, which is acceptable underneath regular conditions. But the idea must be noted that this desiccant have to select the particular qualified solutions of regular manufacturers to guarantee the effective use of desiccant. It is better to use up the desiccant within 24 hours right after opening, because the air flow permeability of polysulfide is definitely greater, poor sealing, consequently to apply the twice seal. Butyl rubber because the first close up, to block the part involving gas. The use involving polythioglue since a new second seal, the main role is definitely bonding, used by gasoline isolation. Process has demonstrated that the lifetime connected with insulating glass for each product production is only regarding 5 yrs, and often the lifestyle of insulating wine glass with double channel seal off is really as long as thirty years or even more than forty years, therefore, the development of coating glass with two bottle funnel seal is the trend of The Times.



four. Cup press

Rubber strip protecting glass press should take notice of the alignment of often the edge with the glass. In the course of the press, a small launching should be reserved at the back of it to let the dried out gas escape from the particular small opening up. After the press, it should possibly be covered immediately. So much, the running of rubber strip insulation glass provides also been done. A range of 5-7mm should possibly be set between the external part of the aluminium frame and the glass borders of the metal club insulating glass. Its employed for applying the moment sealant. The polythioglue should be equally spread down one section to prevent bubbles. So far, this processing of light weight aluminum strip insulating glass has recently been completed.