5.1 PC-3000 application introduction
5.1.1 Frequent English term explanations for PC-3000 application
When installing and applying the PC-3000 application, the English terms normally employed in windows are explained as follows.
(1) EXE ---- execution program;
(two) INI ---- configuration information file, automatically generated;
(3) LDR ---- loading file of circuit board state, made use of to adjust the electric board for the prepared state when the disk cannot be recognized usually
(4) RSC ---- code file, save the internal parameter set study in the difficult disk;
(5) CFG ---- configuration file;
(six) BIN ---- BIOS file (binary) read from really hard disk;
(7) ROM ---- difficult disk BIOS file (a number of BIOS can be stored in the similar time);
(eight) LOG ---- User's record of using a certain module (automatically generated and may be deleted);
(9) SMA ---- S.M.A.R.T. Parameter set, utilised to restore the S.M.A.R.T with the corresponding series of hard drives. parameter;
(10) SSO ---- SELFSCAN instruction set;
(11) PGM ---- major menu structure file;
(12) CP ---- Configuration item of Quantum really hard disk, save the formed file following reading;
(13) RPM ---- a file stored inside the internal parameters read out in the order of BIOS call;
(14) DAT ---- Unknown;
(15) RAM ---- The RAM content on the diamond challenging disk, save the formed file.
5.1.2 PC-3000 installation hardware needs
(1) CPU: P ---- 133 or above;
(two) Memory: 16MB or much more;
(3) Challenging disk space: 200M or a lot more;
(4) VGA display card and VGA show are essential
(5) No sound card, floppy drive, optical drive, or mouse are expected;
(six) The absolutely free ISA expansion slot has to be left on the motherboard;
(7) The energy provide of the Computer computer host must have a ground wire;
(eight) Operating method requirements: above DOS5.0, the DOS state of Windows98 is accessible.
5.1.3 PC-3000 hardware and software installation
1. Hardware installation strategy
(1) Install the personal computer host and set up the functioning challenging disk.
(2) Insert the PC-3000PRO card in to the totally free ISA expansion slot and fix it with darts.
(3) Insert the dongle in the parallel port.
two. Software installation approach
(1) Partition the working disk (greater than 200MB), format it, and set up the basic system files. It is actually not essential to install Windows, however it is suggested to make the directory c: \\ windows and copy files like himem.sysemm386.exe into it.
(two) Edit the config.sys file, which should have
device = c: \\ windows \\ himem.sys;
device = c: windows \\ emm386.exeramo
Edit the Autoexec.bat file, the ideas are as follows:
pathc: \\ pc; c: \\ windows
cdc: \\ computer
vgaga
shell
(three) Generate directory C: \\ Pc.
(4) Copy the PC-3000 software program package together with all subdirectories to c; \\ computer. After restarting, the PC-3000 module choice menu are going to be automatically entered.
5.two PC-3000 specialist really hard disk repair computer software application
five.two.1 Introduction to PC-3000 primary interface
(1) Connect the PC-3000 card towards the host, connect the difficult disk for the PC-3000 card, connect the hard disk, commence the laptop or computer, double-click the PC-3000 icon to begin the PC-3000. Just after beginning the PC-3000, the principle interface appears, as shown in Figure 5-1 (Maxtor difficult disk is selected in Figure 5-1 (c) as well as the program is executed).
(two) Click 'DE' to enter the principle menu on the plan, pick the corresponding operating plan, and commonly choose the default state to obtain challenging disk sources, as shown in Figure 5-2.
(three) Jump the tough disk towards the safe mode, click 'Load LDR' (for auxiliary boot initialization with the really hard disk), and enter the screenshot from the LDR interface, as shown in Figure 5-3.
(4) Click 'From
According to the 'Load LED inside the database', choose the really hard disk model inside the LDR file. At this time, it's essential to select the correct a single, as shown in Figure 5-4.
(five) Click to select the corresponding variety of hard disk to enter the state before preparing to add the LDR file. At this time, the display state could be the info of reading the really hard lamp circuit board. Tough disk facts must be correct, as shown in Figure 5-5.
(6) Click 'OK' and also the two lights of DRD and DSC are on, indicating that the LDR is loaded successfully. The interface just after successfully loading the LDR file is shown in Figure 5-6.
(7) In an effort to verify whether the LDR file is appropriate, it is possible to enter the principle menu again, enter the system, you may click the 'HDDLDREADING' (reread ID, see Figure 5-2) button, re-read the challenging disk ID details, see irrespective of whether the loaded LDR file is appropriate , As shown in Figure 5-7.
(eight) Click 'OK' to display the LDR loading file. Right after the LDR file is loaded properly, the transform from the PC-3000 interface is shown in Figure 5-8. At this time, the suffix Z becomes 0, indicating that the difficult disk could be initialized and booted independently.
Just after finishing the above operations, the hard disk can enter the autonomous boot state, that is certainly, it could carry out related operations around the hard disk. Click the 'Quick Test' button to perform associated tests on the tough disk (which include status data firmware operation, logic scan and also other operations). The principle interface before picking related things is shown in Figure 5-9, and the English translation in the tool general menu is shown in Figure 5-10.
5.two.two Explanation of tool command operation in PC-3000 menu
See Table 5-1 for explanation of tool command operations in the PC-3000 menu.
five.2.three Introduction towards the most important menu of every module of PC-3000
The PC-3000 has diverse menus in Chinese when coping with really hard drives of unique brands, which are now introduced as follows.
(1) The Chinese description of Fujitsu Ver4.52 menu is shown in Figure 5-11.
(two) The Chinese description in the Western Digital (EB, AB, BB, JB, DA) menu is shown in Figure 5-12.
(three) The Chinese description of Maxtor Verl.07 menu is shown in Figure 5-13.
(four) The Chinese description of your WestJet menu is shown in Figure 5-14 (the repair hard disk MOD products incorporate DMCS, ULIST, GLIST, and PLIST).
(5) The Chinese description of the IBM menu is shown in Figure 5-15.
5.three PC-3000 application examples
1. System for backing up firmware
For the duration of computer self-test, the really hard disk model is garbled, along with the computer system can't be booted in to the system by means of the difficult disk. The garbled characters from the difficult disk model are brought on by the damaged firmware. Immediately after the hard disk firmware has a dilemma, only the firmware with the same model (using the challenging disk of the similar model to read out the firmware system, that is stored inside the laptop or computer) or the firmware on the original disk might be discovered. The computer software re-flashes the incorrect module in the firmware. The following requires the Seagate really hard disk as an instance to introduce the technique of backing up the firmware.
(1) 1st, connect the jumper port of the Seagate hard disk towards the USB interface of the laptop or computer through PC-USB (terminal adapter), and after that connect the difficult disk for the PC-3000 card through the information cable and energy cable that come with the PC-3000 card. As shown in Figure 5-16.
(two) Double-click the PC-3000 icon on the desktop, as shown in Figure 5-17, open the 'PC-3000PCICHINA-Utilityselection window, click the' HDDpowersupply 'button within the upper left corner in the window, power on the PC-3000 card, and Select the hard disk, as shown in Figure 5-18.
(3) Choose the 'Tools' → 'Settings' menu item, as shown in Figure 5-19.
(4) The 'Settings' window pops up, and after that switch towards the 'COMPorts' tab, choose the 'COM3' selection inside the 'Usesport' drop-down list within the 'UtitityusingATAO' combo box, as shown in Figure 5-20.
(five) Click the 'OK' button to return for the 'PC-3000PCI-CHINA-Utilityselection' window, select the 'Seagate' alternative inside the 'HDDVendors' list box, and click the 'Runutility' button, as shown in Figure 5-21.
(six) The 'Utiltiystart' window pops up, choose the corresponding choice in the 'HDDfamily' list box, then select the 'ST380011A' alternative within the 'Model' list box, as shown in Figure 5-22.
(7) Click the 'Utiltiystart' button to open 'PC-3000PCI-CHINA-SeagateU5, Baracu-daXX (ATAO)'. Within the window, the HDD combo box displays the hard disk model, serial number, firmware version number, and tough disk capacity, as shown in Figure 5-23.
(8) Click the 'WorkingwithSAsurfacebyPCHS' button and pick the 'ReadingSAsurface' selection inside the pop-up drop-down list, as shown in Figure 5-24.
(9) Enter the name on the firmware to be saved within the 'Profilename' text box within the pop-up window. Here, the model name in the challenging disk and firmware and also the serial number of the tough disk are utilized as the firmware name. Normally, preserve the default settings, as shown in Figure five -25 is shown.
(ten) Click the 'OK' button to pop up the 'ReadingSAsurfacebyPCHS (terminal)' window, as shown in Figure 5-26.
(11) Click the down arrow button for the right from the 'Cylinder' drop-down list text box, and the 'Selectobject' window pops up to select the module to become backed up within the reduce list box, as shown in Figure 5-27.
(12) Click the 'OK' button to return for the 'ReadingSAsurfacebyPCHS (terminal)' window. At this time, the 'Cylinder' drop-down list text box will show the sector where the module is located, namely 'OxEAF5', as shown in Figure 5-28.
(13) Click the best arrow button for the correct with the 'Numberofsectors' text box, along with the quantity of sectors to be backed up seems in the 'Numberofsectors' text box, as shown in Figure 5-29.
( http://www.google.com ) Click the open button around the ideal side with the 'File' text box to open the 'ReadingSAsurfacebyPCHS (terminal' window, and after that select the save path from the backup file within the 'Keep in' drop-down list, as shown in Figure 5-30 (a) , Enter the name of your module backup in the file name text box, and also the method saves it on the C drive by default, as shown in Figure 5-30.
(15) Click the 'Save' button to return to the 'ReadingSAsurfacebyPCHS (terminal)' window. Now click the 'OK' button to back up the selected module, as shown in Figure 5-31.
(16) Return to the '.PC-3000PCI-CHINA- [BaracudaXX (ATA-0)]' window, at this time the 'Log' tab will display the present backup module and module file storage path and also other facts, as shown in Figure 5- 32 is shown.
(17) When the prompt message 'Result ............ A' appears within the window, it indicates that the module has been successfully backed up, then the other modules within the really hard disk firmware may be backed up inside the similar way, as shown inside the figure 5-33.
two. Challenging disk writing firmware strategy
When writing firmware, it can be also essential to connect the poor hard disk to the computer, then start out the computer system, turn on the PC-3000, and begin the hard disk to read the hard disk information. In the event you can not enter by your self, you should start out LDR to begin the auxiliary boot. For the operation process of reading difficult disk information, please refer to the operation measures of backup firmware operation. Just after starting the hard disk, click the “WorkingwithSAsurfacebyPCHS (terminal)” button and choose the “WritingSAsurface” alternative in the pop-up drop-down list, as shown in Figure 5-34 .
(1) The 'WritingSAsurfacebyPCHS (terminal)' window pops up, then click the down arrow button towards the ideal of the 'CylInder' drop-down list text box, as shown in Figure 5-35.
(two) The 'Selectobject' window will pop up, then choose the module to be flashed within the reduced list box, after which click the 'OK' button, as shown in Figure 5-36.
( deleted folder recovery software ) It'll return for the 'SAsurfacebyPCHS (terminal)' window, at this time, the cylinder of the module is going to be displayed in the 'Cylinder' drop-down list text box. Click the arrow button for the appropriate of the 'Numberofsectors' text box to set the number of sectors. As shown in Figure 5-37.
(4) Click the open button around the right side on the 'Fil' text box, the 'WritingSAsurfacebyPCHS (terminal)' window pops up, after which choose the storage location of your firmware to become flashed inside the search variety drop-down list, and pick the brush to become flashed in the reduced list box To enter the firmware, select the 'PCHSOx00EAF5-0x0000 (0x0280, chs)' file right here, after which click the 'Open' button, as shown in Figure 5-38.
(5) It'll return to the 'WritingSAsurfacebyPCHS (terminal)' window, and after that click the 'OK' button, as shown in Figure 5-39.
(6) The 'PC-3000PCI-CHINA- [SeagateU5, BaracudaXX (ATA-0)]' window will be returned, and the prompt information such as the currently flashed firmware and the storage path from the firmware file might be displayed inside the 'Log' tab. , And the progress of flashing the firmware is displayed inside the type of Currenttestprogress progress bar in the bottom from the interface, as shown in Figure 4-40.
(7) When the prompt message 'Result ............ ok' seems at the bottom of your window, it indicates that the firmware has been written, as shown in Figure 5-41.
|
