photo sharing and upload picture albums photo forums search pictures popular photos photography help login
Topics >> by >> Chevrolet Corvette Brake Fluid Replacement Guide

Chevrolet Corvette Brake Fluid Replacement Guide Photos
Topic maintained by (see all topics)

Today we're gon na be changing the brake fluid on my 2017 c7 Corvette. Now for this, we're going to be utilizing the motive power bleeder and a GM brake fluid tank adapter kit. Today we're gon na be removing all 4 wheels from the vehicle to bleed the brakes, nevertheless, you can raise the car in each spot and remove each wheel individually.

Replace the cap on the brake tank with the bleeder kit adapter ensure it's screwed on tight. You can go to your brake bleeder valve fracture it open and the fluid we pressed through the system. Typically, you'll fill this tank up with brake fluids so that you do not have to fret about running the system dry.
Below is the website to https://www.crossroadsofbeckley.com/ for more details.

The first caliper that you want to bleed is going to be farthest away from the ABS module. If you take a look at the caliper it has two bleeder screws, you're going to wish to bleed the within screw first and after that work your method to the outdoors screw, ensure that you get all the old fluid out on the within, and then pertain to the outside and flush all that brake fluid out to the after the back.

Remove the rubber caps on the bleeder screws use an 11-millimeter wrench to loosen up the screws. Place the end of the rubber tube onto completion of the bleeder screw. Once you split this open and the fluid starts to stream, you're going to want to go and check on the power bleeder in the front of the vehicle and make certain that you maintain a proper pressure to keep pressing the fluid. And ensure that you don't lack fluid in the tank since if you press any air through the system then you're gon na need to renovate everything all over again.

Reinstall all of your wheels and torque the lug nuts down to a hundred foot-pounds, it's probably an excellent idea to utilize some anti-seize on the studs. The lug nuts dolts seize to these the gun is currently on the most affordable setting primary this will only go to 20 foot pounds, you might want to make sure that you torque everything down by hand not with the weapon.




has not yet selected any galleries for this topic.