It's constantly aggravating when you lock your type in the car. Not only is it a discomfort to remove the window and reach around into the car, but then you have to go back inside and await someone to come assistance. There are also times when we forget our factory code. If you're tired of breaking your arm attempting to reach your keys, we've got you covered! Here's how to reset a Ford door lock without the factory code:.


Reset Ford Door Lock Without Factory Code.
You can reset a Ford door lock without the factory code by plugging in a metal things into the hole on the outside of the door. Remove any hair or clothing from around this location before placing your tool. You'll have the ability to hear it click, suggesting that you have actually effectively unlocked your door.

This is a simple trick for when you forget your factory code and do not wish to break your arm trying to reach in and grab your keys!


The Window Technique
The initial step is reaching your hand up to the passenger-side door lock. You'll need to make sure that the window is rolled all the way down, so rise and feel for the latch. It needs to be on the bottom of the door. When you discover it, press it in and then pull it down. If you're lucky, your key will fall onto the ground or into your hand!

If not, then you'll need to reach in through among the windows once again. There are two ways to do this. The very first way is by pulling out both door deals with until they're at a 90 degree angle with the vehicle body. Next, reach in through among the driver-side windows and feel for your secrets. The other way is by opening both doors and reaching in through either among them.

The 2nd alternative might be simpler if you have keys in both hands when you locked yourself out in order to conserve time. Possibilities are that you'll find your secrets more quickly given that they didn't get lost under other things like bags or food wrappers like they would if you were searching for them on the floorboard, or inside a wallet or knapsack that has actually been jammed into a corner.


The Trunk Technique
Chances are, you'll find your type in the trunk. Depending on what sort of vehicle you have, this might be an uphill struggle, however it'll save effort and time.

To start, you'll want to go to the back of the automobile and try to find the key slot on the trunk. It will probably be found on the left hand side of the trunk.

Next, take your keychain with your home key on it and attempt to put it into that slot. If ford door code doesn't fit or goes in too far, then it's not that slot. Keep attempting till you discover the best one.

If your keychain does fit perfectly in there, then push down firmly until you hear a click sound. This will either unlock or lock the trunk so try opening it as much as see if your keys are there!



Conclusion
The window technique is one of the most popular techniques of resetting a Ford door lock without the factory code. Here is how to do it:

1. Start by unlocking the vehicle door.

2. Now, open the chauffeur door window all the way, so that it is at a 90-degree angle to the ground.


3. Next, utilize a strip of paper that is at least 3 inches broad and carefully press against the edge of the window where it is most likely to increase.

4. Now, press down on the strip of paper with your hands to push versus the window with your body weight.

5. Repeat this procedure five times, each time with a different section of the strip of paper.

6. After you are done, you will be able to close the window and lock your automobile door with no problem whatsoever

Information source: https://www.holzhauers.com/blog/2019/april/26/ford-keyless-entry.htm