Today, I wish to make a rapidly guide informing how tow change the Cabin Filter on BMW X5 F15.

The accessories you will require:

- Cabin filter,
- Flathead screwdriver

The replacement procedure will take about 30 minutes.

1. On the Left side (visitor side) Eliminate the trim cover, Watch out for the 2 locking tabs (see the image listed below) on the Left as well as center ensure its released, after that Lift the back part up as revealed on photo (see the image listed below);.

2. On the Left side (visitor side) Eliminate the trim cover, Keep an eye out for the 2 securing tabs (see the picture listed below) on the Left and center ensure its launched, then Raise the back element up as revealed on image (see the photo noted below);.

3. Eliminate the Windshield cleaning device waterline brace;.

4. Eliminate the gas support strut. This will certainly provide a lot more flexibility to get rid of the cabin filter box;.

CARE: make sure the hood dosen't come down on your head, make use of a stick and support hood as required.

CAUTION: DO NOT ELIMINATE SECURING C CLIP FROM STRUT, IT'S EXTREMELY DIFFICULT/IMPOSSIBLE TO REINSERT!

To eliminate usage the level head screwdriver and likewise insert it under the protecting clip and also tear it up (see fig 1 left), while preserving the clip tore open, use your hand and also pull the head of the strut out of the outlet (see fig 2 center) as quickly as removed relocate the strut away.

5. Eliminate the cabin filter cover, there is a plastic lock tab in between (see the picture noted below);.

6. Raise from the lock tab after that pull towards you and also it should move out;.

More info right here http://carratingsandreviews.org/.
7. Flip the cabin filter owner over and likewise you'll see the filters on the edge there are press tabs to get rid of the filter, and filter establishes one approach and also make sure it's secured prior to setting up;.

8. When re-installing cabin filter top make sure you line up the lid to the notches on the bottom component of the filter (see the image listed below);.

9. Re-install the top cover/trim, this can get challenging now there are 3 things you need to straighten so as to get it inappropriately. Start correcting the alignment of the RED BOX (see the image below) initially there are 3 openings in addition to 2 tabs and likewise 1 V-shaped tab that requires to line up initially prior to it fits some fidgeting is needed to obtain them in. When you obtain the leading part in making certain heaven BOX (see the image listed below) tab secured the area and also Rainwater channel is positioned appropriately. Do not forget to clip lock clip in the center YELLOW BOX (see the image listed below);.

10. Re-install your hood strut, no requirement to tear the C-CLIP merely POP it back in, and likewise re-install the windshield washing machine water line bracket on to the strut;.

And that relates to it. The Adjustment intervals are Every 10k miles or 1-2 years which depending upon how dirty is on your area.