An enhancing molding can be defined as any continuous projection utilized to improve the feel of a wall. In ancient Greece, these folks were first employed to throw water from the wall. The contours, measurements, and projections of moldings vary greatly.

Frieze
One kind of molding - the frieze (or frieze board) - was suited for the Parthenon in the Acropolis. The frieze is regarded as included in the Greek architectural style.

The Parthenon was produced for the goddess Athena. The frieze moldings which were used were intended to tell the tale of her triumph over Poseidon in succeeding as the patron with the ancient city that's now Athens.

The frieze panels can be a number of designed pediments which can be filled with the pictures of Athena's birth and rise to power. Today, a frieze board may be the lcd just under a crown molding or cornice. Often, low relief is used for this panel with regard to added decoration.

Today, frieze moldings are most frequent being a part of an ornamental molding that follows the neoclassical architecture or decorating style.

You want a pretty high ceiling (a minimum of 9 feet), and it's really recommended that you paint or stain the frieze along with the crown molding precisely the same color. The frieze is a superb approach to visually bring the ceiling down and make the space appear cozier.

Crown Molding
Crown molding is easily the most popular type of cornice molding. Crown molding is generally a single-piece of decorative molding, installed near the top of a wall, with an angle towards the adjoining ceiling. However, I've come across crown molding assemblies of 5 or more pieces in additional elaborate settings.

Crown molding often features a profile that projects out on the ceiling and around the wall, adding a wealthy appearance into a room. It's used near the top of cabinets or built-in furniture.

Introducing this type of decorative molding with a easy room gives a historic character how the room may not otherwise have. Crown molding can also be used in combination with other moldings to provide details to fireside mantels and shelves. (For what it's worth, this might be the most popular architectural feature).

Crown molding is often a type of Cornice Molding. The term "cornice" describes molding installed over the top of a wall or more of the question. After this therapy is made from multiple components of molding, method . a "build-up cornice." One other type of cornice molding is the Cove Molding.

Cove Molding

Cove molding is very just like crown molding, with the exact same application and performance. The real difference backward and forward is in the profile. Cove molding includes a concave profile (which bows inward) while crown molding has a convex (outward) profile.

While crown is most in your house in traditional settings, Cove moldings are equally comfortable in country, as well as contemporary settings. That you do not normally see multi-piece assemblies of cove moldings. You'll be able to occasionally find it "beaded" at top and bottom for any little accent.

Entries, formal areas, formal dining rooms, and master bedrooms usually receive decorative moldings with ornate or traditional patterns.

Kitchens along with other more functional aspects of the home may be that you will find the more kind of the cove molding. Over time, coves and crowns have grown to be much smaller, but a majority of still bear the styles and shapes with the original Greek and Roman designers.



Chair Rail Molding

A chair rail can be a decorative molding that divides a wall horizontally, usually about 32" to 36" across the floor. They protect the walls in locations where damage might occur from people arising from chairs.

That is why, the harder traditional chair rails may nosing in the center, with curved and beveled surfaces that taper to the wall above and beneath the nosing.

Today, chair rails remain a standard detail in traditional interiors. They serve the decorating effect of unifying the different architectural details of an area, such as window and door trim, and fireplace surrounds.

Chair rail doubles being a cap for wainscoting or other wood paneling. This decorative molding adds a feeling of detail and charm while achieving continuity within a room by unifying the different decorative elements.

Panel Molding
Panel molding, commonly known as a picture frame molding, appears to be a substantial empty frame, and is also often a part of designs on walls of old Colonial and, Georgian, and Early American homes. The placement with this molding ought to be higher than the chair rail height resulting in Ten to twelve inches below the ceiling.

How big such a decorative molding, measuring 1" to 3" wide, needs to be proportionate for the ceiling height with the room. Just like the other moldings, panel molding adds feeling of charm and delicate detail to a room.

Wall framing appears with the Georgian amount of American architecture, when plaster began to replace wood panels about the walls. Panel molding also is a fantastic way to divide walls into large, great looking units, minus the same expense of full wall paneling.

Another application of this versatile molding is usually to trim openings manufactured by wider planks which can be assembled as rails and designs. Often, the centers of these frames remain open. By applying panel moldings around the perimeter with the opening, you develop the design of a photo frame.

If this decorative molding is painted in the same color as the surrounding walls, you use a sculptural quality to a wall, adding texture and shadows. If moldings are painted in contrasting colors, they are able to produce a striking 3d appearance, giving depth and dimension. Such a therapy is popular for staircases and entries.

Baseboard & Base Molding

Baseboard molding protects the bottom of the wall from ware and tear, while hiding openings along with other irregularities the place that the wall meets the floor. Base moldings provide floor line a better profile, and is as elaborate or simple as you like.

Whereas it can be relatively simple to setup chair rail over a level plane, baseboard (like crown) could be tricky if your floors (or ceilings) are not level. Because of this, I would recommend getting a professional woodworker to the installation of these moldings.

As you remedy to uneven floors, you'll be able to use a "shoe molding" across the bottom front edge to give the baseboard a finished look. Something different you're able to do with baseboard (along with together with the toe kick of one's cabinets) is incorporate accent lighting.

It is not in line with the pure traditionalist, but it's a reasonably nifty approach to have accent lighting round the perimeter of your room. You couldn't do this until they created the small LED rope lights nowadays.

Rope lights come in different lengths and colours, and could be easily installed behind baseboard. Just make a notch from the back side of the baseboard, towards the top, and run the rope lights in the notch.

This is often employed in commercial spaces, but continues to be put in entries and hallways - specifically in contemporary homes.

Flexible Moldings
For those who have a curved wall or arch, you are able to likely have an excellent craftsman build a curved molding approximately 3 times the expense of an upright molding. Or, you can get a versatile molding for about a similar price because straight one.

These permit you to install moldings onto curved surfaces or arches, without the delay and tariff of keeping them produced from wood. The stock profiles (you'll find hundreds) are similar towards the rigid versions and they are compatible so far as paint finish is concerned.

Check out about moulding.vn just go to our website.