Unknown Facts About Switches – Industrial and Aerospace - CIRCOR

Therefore, as the mass 46 relocate to the right, the contact 56 will bridge switch contacts 26 and 28 offering elec- F is supplied with external threads 62 engaging the nternal threads 64 on the housing 12. You Can Try This Source may be built of magnetic product having a high retentivity and high coercive force such as alnico, or any appropriate product.

In this way, the magnetic appealing force e, Xerted by the magnet on the inertial mass can be Varied. The magnetic attractive force holds the mass against stop 42 and the magnitude of the force identifies the velocity force needed for the inertial mass 46 to break away from stop 42 and to transfer to contact switch elements 26 and 28.

V Given that the magnetomotive source varies inversely as the square of the separation range in between the magnet 58 and the inertial mass 46, as quickly as the mass breaks away from the magnet, it will rapidly transfer to close the contacts 26 and 28. The range taken a trip by the mass determines the time or closure.

Shock & Acceleration Sensor Switch RBS02 - OncQue for Beginners

'The mass will stay i n`the closed switch position until reset by an acceleration in the opposite instructions or decreased acceleration proportioned to magnet 58 and mass V 46 and range to contacts 26 and, ZSi Fee to the large identified magnitude comprising a switch block, a first r and 2nd switch contact installed on one face of said block, a stop, stated stop being spaced from stated one face of said block, a longitudinai guide shaft centrally mounted in between stated stop and said one face of stated block, and inertal mass slidably installed on said shaft and-movable from a position defined by said stop to a position specified by stated block, a magnet, said magnet being movabiy installed in longitudinal alignment with said shaft in stated r block to make it possible for setting of the separation range between said mass and stated magnet.