Once you've purchased a robotic mower, you're probably questioning how to install the border wire around your lawn. Mark the area with a guide wire. If you're installing a robotic mower in a bush or a flowerbed, make sure to put the wire there.

The next action is to lay the border wire in the air. See it thoroughly and observe its performance as soon as this is done. find this can then bury the cable television if it's successful. As soon as the border wire has actually been laid, you can utilize it to develop islands in the yard. When the robotic lawn mower is not trimming these islands, you can leave them uncovered. You can lay the limit and guide wire underground.

The third step is to lay the guide and border wire above the ground. Once the boundary and guide wire are laid, you can wait a few weeks to keep track of the efficiency of the robot lawn mower.


After laying the guide wire, you require to lay the boundary wire. The wire will be damaged if you enable turf to grow over it. You can move the boundary electrical wiring to the ground.

After laying the border wire, you require to connect it with the guide wire. You can attach the boundary wire. Utilizing these tools will help you properly connect the guide wire and guidewire.

When you've determined the width of your robot lawn mower, you need to set up the border wire. After a few weeks, the turf will grow over the wire, so it's important to make the wire level.

As soon as you have figured out the appropriate position for your robotic mower, you can lay the boundary wire itself. When you have ended up laying the guide and boundary wire, you can move on to the next step.

The boundary wire is an important part of the robot lawn mower setup. After laying the border wire, you need to mark the location where the robot lawn mower is to be set up. This will ensure that the limit wire is able to dock effectively.

You'll need to connect the guide wire with the border wire when you have actually selected a location for your charging station. The guidewire will direct the robotic mower to the charging station. The boundary will help you to manage the path of the robotic lawn mower by connecting the two wires. You can likewise utilize a pegboard or a guidewire to direct the robotic to the charging station. This will assist you put the limit wire in the right area.