He said the difference was "night and day" and that my gun was incredibly fun to shoot. All I know is I'm now madly in love with this gun and want to take it to bed with me at night. Barrels. Or if you want to add something quiet to your Glock we have threaded Glock barrels that make it easy to attach a suppresor or compensator of your choosing. For example, if you install the CALI Compensator System on a Glock 19, the overall length of the pistol will become identical to Glock 17. G17 equipped with a CALI Compensator System will have an overall length of Glock 34 and so on - one size up. They also have an Electro-Mechanical (which uses a combination of Springs and Magnets) System, but it was a bit bulky and heavy, and used the forward rail of the Glock, which I also use for a front grip on, so I decided to just get the Mechanical (which uses Springs) System instead.

417C (Glock® 43 compatible) Compensator The 417 Compensator features a 2 chamber design (2 vertical ports and 2 side venting ports), it also features a front sight hole. Developed for Gen 3 Glock 17/19 pistols, the Mass driver compensator is unique, as it uses a counter recoil design. Strike Industries has come up with an innovative solution to that problem: the G3 Mass Driver Compensator that does not require a threaded barrel. The kit did not come with written instructions, so I watched a short video at the Strike Industries page. That is the reason they went with a proprietary muzzle attachment system consisting of a short threaded portion and an EDM cut groove on the muzzle. The OEM plastic mag release will get chewed up in short order scraping against the thin-body metal mags. The drawback of the pinned muzzle device is that in order to disassemble the barrel, you’ll need to remove the pin and the compensator. In order to install this system, you’ll need to remove the existing barrel, install the CALI Compensator System barrel, thread on the Carry Compensator, pin it in place and assemble the pistol.

The ZEV Technologies compensator is outfitted with an enlarged guide of rod channel, contoured porting, and a mounting system, allowing the shooter to install and remove this device without using a locking compound for the thread. So I bought this barrel for my Glock 19 4th Gen with the intent of installing a Zev compensator on it. Tame the recoil and muzzle flip of your GEN 4 9MM Glock with a CARVER Custom 4 Port Decelerator Aluminum Comp. Easy installation. Compensator is made out of aluminum with either a black anodized finish or a silver brushed aluminum finish. It is in the original packaging, only taken out long enough to install and thread the comp, then reverse all those steps. glock 19 mag extension recommend using the supplied thread locker and be sure to torque the comp screw to 25 lbs/in. I personally think this a great comp even for factory loads . HC9C is a brilliantly designed compensator that will add great value to your G19 by severely reducing the vertical and horizontal recoil, this is an amazing upgrade that not only adds functionality but it’s visually pleasing as well! Actually, it’s not a terrible issue especially considering that you can still clean the bore even with the barrel captured in the slide.

When holsters fired after the (2) new shooters, in a firmer and experienced grip, issue was no longer present. Once the tourniquet is adequately tightened, bleeding will cease and the windlass can then be locked into place using the bilateral retaining clips. TCCC approved tourniquets to treat life threatening arterial bleeding found on the arms and legs - “Tourniquets alone could save 60% of all the preventable deaths from combat trauma,” Dr. Fabrice Czarnecki told PoliceOne. The comp arrived from Primary Arms in a cardboard box with everything needed to install the comp to my weapon. Currently my Legion Comp is on a Victory First Barrel, within a Brownells' slide, riding a G19 sized Polymer80 frame. While it worked fine, there was a bit of a gap between the slide and the comp I didn't like. Despite this, though, I didn’t find the Gold Main Spring to be hard to work with, and was able to slide it in easily. Best of all however is the combination of color contrast options (Black on Black, Black on Nickel, Black on Gold) & the overall P320 compensator performance. This solution allows them to achieve a minimum overall length increase which they call “Glock one size up”.