Content written by-Patton Vedel

It is common for plumbing problems to arise in a newly purchased home. The majority of the time this happens in the kitchen or bathroom. At some time, everyone who owns a home will have some type of problem with the plumbing. The following advice will help, when that homeowner is you.



If your toilet is slow to flush, add some white vinegar to the overflow tube. White vinegar helps the water from your tank to flow quickly, which will make the toilet flush faster. It is recommended that you use about a quart of the vinegar and let it stay there for at least an hour before flushing.

Noisy pipes that make squeaking or hammering sounds are an easy problem to fix. Any exposed pipes will need to be anchored. If pipes are located in the floors, ceiling or walls, a professional might be needed for the job.

Before starting any plumbing project on your own be sure to do a great deal of research. There are many resources available to assist you in understanding your plumbing system and help you to avoid many common mistakes made by do-it-yourself novices. Reading about other people's mistakes can make the difference of saving or losing money.

If your plumbing is making strange noises you may have lost something called your "air cushion". To turn this back on, you're going to need to turn off your main water supply. Run all faucets in your house and then turn back on your main water supply. This should make everything sound better again.

Make sure everyone in your home knows where the main water shut off valve is and that they know how to work it. browse this site , if there is a water problem, anyone in your household can turn off the water, thereby reducing the chances that your home will incur major water damage.

Sometimes you have to make the choice between replacing or repairing. If you have an old appliance, that uses a lot of water or electricity, it may be best to replace. Sure, it will cost more initially, but it will save you money in the long run. The other thing is, you can't be sure how well a repair will work out, whereas with a new appliance you'll at least get a guarantee.

DIY plumbing jobs will require that you understand how to solder copper for the lines for the water supply. You can practice this skill so that you will be able to run your lines without worrying about it leaking. Search online for video tutorials that can help you get a handle on how to go about soldering.

If you are using PEX tubing for the supply lines in your home, make sure you get the right tools for the job. PEX tubing requires a completely different tool type than regular lines. PEX has a lot of benefits though, so don't let the different requirements throw you off.

If you live in an area that sees routine freezing temperatures, make sure you do something to keep your pipes from becoming frozen as well. There are a wide variety of ways you can keep your pipes from freezing, which will help you avoid damage to your home and costly repairs.

When searching for a good plumber you should always check references. It is easy to just go with the lowest price, but you have to do your research and make sure the plumber has a good reputation with the people they have done work for in the past so you do not get a bad plumber.

In the winter months, if you live somewhere where temperatures fall below freezing, leave your faucets on a little bit to let a thin stream of water through. This will help prevent the pipes from freezing, which could be a major problem for you and all the pipes in your home.

Watch out for decreased levels of intensity in the water flow in your bathroom. This can be a sign of calcium or mineral deposits disrupting water flow. If spotted early enough it may be possible to remedy this without having to replace the pipes.

Heat up frozen pipes carefully if they have frozen. In colder regions, pipes placed closest to outer walls and ceilings could freeze if not properly insulated. Use hot rags, hot water, a blow dryer or similar heat source. Start heating at a place nearest the tap, then work backwards.

Be sure to have a running toilet fixed as soon as you can. Having a running toilet uses more water, which raises your water bill. To fix it yourself, you just have to find out what the problem is and buy the supplies you need. If you can't fix it yourself, call a plumber.

If you are starting to install a water heater and see a pipe going out from the drainage area, be sure to reconnect that pipe. This pipe is likely for recirculating hot water, which makes a significant difference in water-heater efficiency.

Check for leaks behind the wall tile in your bathroom, especially any tile surrounding your bathtub, by gently pressing each tile and feeling for some give. If you find any mushy or soft spots, you will need to find the source of the leak and repair it to prevent further damage.

It is imperative as a homeowner that you know exactly where your main water shut-off valve is located and can operate the valve in case of an emergency. The best first step measure for frozen pipes is to stop water from entering your home in the first place. Locate the main water supply valve and turn it on and off on a regular basis to keep it easily operable in an emergency.

Plumbing can be an advanced, highly technical profession where more often than not, you need an experts help. However, sometimes that is not the case and there are some simple do it yourself home fixes. If you take a little time to read about them you will find some of the most common plumbing problems are able to be handled by the common man.