How to Cut Formica Countertop Already Installed

About How to Cut Laminate Countertop with a Table Saw

Cooking Area Sink Cutouts in Laminate Countertops, The same process and tools are utilized to cut out the opening for drop-in sinks in your kitchen. Measure carefully, drill corner holes to start cuts with a jigsaw (likewise utilizing a blade with a high tooth count for a cleaner cut), and make as consistent a cut as you can.

If you swerve a bit and the cut is not absolutely directly, the rough edges will be covered by the boundary rim of the drop-in sink. If that rim is well sealed with a silicone sealant, water will not seep in to cause damage to the countertop. Let's Get To The Formica Counter Top Cut, With tools put together, shatterproof glass, and face mask on, let's get to work.

How To Cut a Laminate Countertop - Including Lessons Learned - YouTube

Mark the line with the masking tape and established your rip guide so your circular saw blade is lined up with the cut line. A blade depth of 1/8th inch will be enough, so set the saw for your cut. Slow and stable wins the race, so to speak. The objective is to make a precise cut without chipping, and sluggish and constant will help you reach it.

A little swerving will not injure the end outcome, as the belt sander or sanding block will treat it into a straight line. Set the blade depth deeper, make another pass to cut much deeper into the countertop; or, use a jigsaw for that more cut. When you've finished cutting through the counter top, eliminate the cut piece.

Getting My Cutting and Drilling Plastic Laminate Countertops Q&A - the To Work

Swerves during cutting will likewise disappear, and you'll end up with a straight website line. Ensure the sanding strokes are down, not up, so you do not raise the laminate off the countertop or cause a chip. Vacuum up the fine debris, and the job is done. It's that fine debris is why you require security glasses and face masks protect your eyes, and let the mask catch that fine debris in the air instead of breath it in.

How to Install Laminate Countertops - Lowe's

Whether it's simply a few inches or a foot or 2, a laminate backsplash offers an appropriate finish to your kitchen counters. Generally, the backsplash will be cut before installation. This Article Is More In-Depth 'll follow the very same process for its cutting as you provided for the counter top itself. But, if the laminate is currently installed, you can suffice down in location.