They have very little overhead; usually the office is a trailer or a small building. Many of the cars that are in there were had for free. In some cases there was a charge for taking the car to the yard.

Recycling is one of my favorites. I only hold my scrap for a day and then sell it to the scrap metal the next day. I collect appliances, bed frames, ceiling fans, metal futons,etc.. I pull the copper wire out when it is easy to do because its worth more. I will cover that in another article. Just for scrap mixed metal you get about $6.00 for a 100 pounds. Does not sound like much but it is easy to get a 100 pounds of scrap. For example; a refrigerator, washer, microwave, futon, hot water heater, and five bikes weigh about 800 pounds. That is $48.00 tax free!



To be a great scrapper, you must be a great businessman. You must be personable, professional, and polite. You should not try to cheat anybody, ever. One bad encounter will make your business name worthless. So, for your own sake, be professional. This includes officially filing for a business through the state. It means having your own business cards printed. It means having a separate phone line for your business calls. It means spending money on professional advertising! Do what you can to make yourself a professional.

The first order of business is to get the plastic casing off. In many instances this means taking out 4 screws and then just taking it off. However, some units have just 2 screws and then tabs. Nonetheless, it is not difficult to get the casing off. The plastic should be set aside and then sold to a polymer company. ABS, the plastic used to make the cases, sells for roughly.10 per pound and can go much higher if you have a lot of it.

If you're one of those handy people who can do your own tune-ups, change your own oil and handle minor repairs, congratulations. You have the skills to save thousands of dollars over the life of your car. But you also know that you can spend hundreds on car parts with a single trip to the auto supply house. And if you need an item that's classified as a dealer-only part, you could easily be looking at thousands of dollars for the replacement.

For more then a decade now many universities, engineering associates and laboratories have done several test all of which proved that by adding tiny amounts of hydrogen to an internal combustion engine. It will put out fewer emissions, increase performance and increase gas mileage. If this only increased gas mileage by 1-2% it would reduce our yearly consumption of fuel by more the a billion gallons a year. However many are experiencing gains by as much as 116%. Of course this does not mean your vehicle will get that type of increase in gas mileage.

The quality that you want to impart to your cabinet by salvaging depends on the type of work you would want to do. The following steps will enable you to salvage cabinets I a proper manner by achieving the right quality while saving costs.

Two types of nitro cars exist now: on-road cars and off-road cars. On-road cars were made to race on even race tracks and paved streets, so they can basically race wherever a prepared and smooth surface exist. On the other hand, off-road cars are able to tackle hard, rough and bumpy terrains. And, at high speed, they can even jump and get back down without staggering. Because of scrap metal yard , performance, speed and durability, it has become much more appealing to today's RC car racers overall.

Like in any market there were those that couldn't afford a new car and the payments that would follow, but thought if I can get financed why not drive a newer, greener car? These are the people that in the months ahead it will hurt the most. They will face the reality of a large payment that they didn't have, and now can't afford. So they will lose their new ride and damage their credit at the same time.