Article by-Kure Hvid

When you hire a plumber, it can cost a lot of money for even a very simple repair that you could have done yourself with some basic plumbing knowledge. Don't waste money on professional plumbers again! Read on for some tips on solving your own plumbing problems with tools you have at home.

Don't pay a plumber until the job is completed. at plumbing and heating may require some money upfront, but it's wise to wait until the job is completely done before giving him the entire payment. Many things can happen between the stop and end of a job, so to be safe wait until you are satisfied with the completed work before paying.

If your toilet gets clogged, there is a low level of water in toilet, and the plunger is not working, you may fix the problem by dumping warm water from a bucket into your toilet from about waist level. Once the water is lower, do this again.

Treating your drains every month is a great way to avoid future clogs and other problems, and it's a very simple procedure. Just run one to two gallons of hot tap water down each drain in your house.





If water is backing up into multiple fixtures all over the house, it is no longer going to be effective for you to use chemicals or a small hand snake. This is evidence of a blockage in the main line, and you must contact a professional to take care of this problem for you.

You can check your toilet for leaks by adding a few drops of food coloring, Kool Aid or some coffee grounds to the water in the toilet's tank (not the water in the bowl). Check the water in the bowl after a half hour or so. If any of the coloring agent is visible in the water in the bowl, the tank is leaking, and you will have to have it repaired.

If water backs up from one sink to another, it is because the lines are connected. The part of the branch line for one device might be higher than another, but most likely there is also a blockage in the branch line connecting the two devices as well. This blockage must be cleaned.

If water is not coming to the dishwasher, you most likely have a blockage somewhere. You will need to turn off the water supply and remove the hose that leads to the dishwasher. After securing the hose, turn the water back on. See if it feeds into a bowl. If not, then you must find the block where it is at which may include removing more piping.

Before you can fix a toilet that does not flush properly, it is important that you find out what is causing the problem. Depending on what the problem is, you may be able to fix it yourself. However, more complicated toilet flushing problems may require the services of a plumber.

Do not ignore a slow flushing toilet. This is usually a sign that something is wrong. It can also cause backups and overflows. The most common causes of a slow flushing toilet are sediment build up, tank malfunctions, or partial clogs. You should periodically check for these problems.

Avoid using harsh chemicals to clear clogged drains by purchasing a hand-held manual auger. A drain auger is a one-time purchase as opposed to purchasing a new bottle every time a drain is clogged. This is especially helpful for people who deal with clogged drains often, such as people with long hair or kids who like to drop things down the drain.

When looking for a plumber, you have quite a few options. Ask friends for recommendations of who they use. Check online for plumbers with good reviews and references. Use your yellow pages and look under "Plumbing Contractors" or "Plumbing, Drain and Sewer Cleaning". Make sure that you contact more than one plumber before making a choice.

Have a specific plumber in mind before you have an emergency. Most people don't think about plumbers until they find themselves having a big problem that needs to be fixed right away. Instead, choose a plumber who you are comfortable with and whose experience you trust--way before you actually need his services.

As most people don't have a clue about plumbing, they will tend to pay whatever the plumber charges, no matter how large. If you own your home, you should definitely be sure to learn enough to understand what the professional is accomplishing. This will go a long way towards ensuring that the plumber does not take advantage of you by overcharging.

Make sure that the temperature of your home's water heater is not above 120F. On older water heaters, be sure it is not above medium settings. When temperatures get higher than 120, scalding can occur. Also, having the settings above 120F, tends to use more energy than lower temperatures do.

Never try to undertake a project that you are unsure of. Additionally, never call on a friend to help you with something, if they are not a professoinal. There have been hundreds of good friendships ruined by a guy claiming to know exactly what he is doing, when the truth is he is clueless.

When replacing any PVC type pipes in your home, make sure you buy the correct PVC for the job. PVC comes in several different sizes and grades as well as for different temperature applications. If the water going through the pipes is headed for the kitchen or bathroom, or is for laundry or gardening usage, it must be labeled as "Potable."

When plumbing supply shop are snaking out your drain, always make sure that you use a mask to cover your face. You will be pulling up all sorts of chemicals that you do not want to inhale or get on your skin. Practice safe plumbing if you desire to optimize your health.

As mentioned above, most periodic plumbing maintenance is simple and straightforward. Most repairs resulting from serious damage to your plumbing are not. Now that you know how to deal with the plubming issues in your home, you should be more prepared to prevent or mitigate the more serious problems that can result.