Reason evaluation:
When setting the BIOS, the startup item will not be identified, which is frequently caused by the inability to recognize the U disk. data recovery software can start out from the U disk itself plus the bios setting to resolve it.
Answer one:
The first step: very first of all, we've got to check regardless of whether the U disk boot disk created is thriving. One example is, following we have completed the production on the Dr. Han U disk boot disk, you are able to start the simulation. The boot disk is successfully produced.
Note: When the simulation startup fails, then we can format the USB flash drive by means of Dr. Han Installer Master, then re-create the USB flash drive boot disk.
Step 2: Insert the U disk boot disk in to the USB interface of the pc. If https://www.openstreetmap.org/user/Mohamad%20Hildebrandt is a desktop computer system, Xiaobian recommends which you plug within the rear USB to be far more safe.
Step 3: Restart the personal computer. When the startup screen appears, swiftly press the BIOS startup shortcut essential to enter the BIOS settings. Everyone should spend focus that the shortcut keys of distinctive models are various.
file recovery software : Soon after entering the BIOS interface, come across the 'USBStorageLegacySupport' or 'USBStorageFunction' alternative and set it to 'Enabled'.
Step 5: Immediately after the above operation, if we nonetheless can't uncover the U disk boot item, we switch for the Boot interface, select 'HardDiskDrives' and press Enter; following entering, we set the initial selection to U disk via the keyboard path keys.
Step 6: Press the ESC key to return, select 'BootDevicePriority' and press Enter to enter, as well as set the first alternative towards the U disk by way of the keyboard path keys.
Step 7: Lastly, press F10 to save and exit.
Resolution two:
There's an additional situation. Most of the newly-built systems default to win10 by default, and commonly the protected boot mode is enabled, plus the U disk boot item is also disabled.
Step 1: Enter the BIOS setup interface, come across 'SecureBoot' and press Enter to set it to 'Disabled'.
Step two: Set 'UEFI / LegacyBoot' to 'Legacyonly' or 'Legacyfirst'.
Step three: Ultimately, press F10 to save and exit.
The above is the solution that the USB flash drive reinstallation method bios brought to everybody can not find the startup item. When the U disk reinstallation program cannot obtain the startup item, we are able to take the technique of bios setting and re-making the U disk startup disk to solve.