save_a_lot_of_money_with_thi Photos Topic maintained by (see all topics)
Article writer-Salazar Morsing
How can you go wrong with knowing the best information available when it comes to plumbing? You have come to the right place if you want to know the most reliable and well proven tips and tricks to use. Take a few minutes and read the advice we provide here in this article.
To help you find a good plumber, you should get recommendations from people whom you trust. Asking a friend or a neighbor is usually more trustworthy than picking a random plumber out of the phone book. You need a competent plumber, otherwise you could be in for a much bigger problem down the road.
If you have issues with the plumbing making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. This can be easily solved by the installation of a pressure-reducing valve, which can be done by most homeowners.
Check how well your toilets are flushing. If the handle needs to be played with in order to keep the water from running constantly, or if it needs to be held down several times in order to flush, you may need to switch out some of the parts in your tank. This is not expensive, and it could help reduce your monthly water bill. It could also mean that you avoid the embarrassment of the flushing system breaking when you have visitors!
Is your toilet leaking? Find out by putting some food color in the tank and then check the bowl later. If there is colored water in the bowl, the toilet has an internal leak. To fix an internal leak you can simply replace the tank's ball or flapper.
If your toilet is constantly developing moisture on the outside, you may want to consider turning up the heat in your bathroom. The biggest cause of "sweaty" toilets is cool and moist air. Believe it or not, this moisture could actually cause damage to your toilet, so it is crucial that you fix the problem.
If your home operates on well water and you notice pink or orange stains in your bathtub and other fixtures, this is no doubt due to iron in the water. You should purchase a water softener to use, or ask a local business to make a visit to your residence and resolve the issue for you.
Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.
There are simple ways to check your toilet for leaks that can ultimately lead to great cost savings in the long run. The easiest way to do this is to pour a small amount of food dye into the holding tank of your toilet overnight. In the morning, if you have any color in the basin then you know you have a leak that needs some attention.
Basic problems with toilets can be a quick fix for even the rawest amateur plumber and is worth attempting if you can take the time to research the problem. Seek out the necessary part or parts from your local hardware store and ask for support in how to properly install them.
To avoid water damage to walls in the kitchen, make sure all seams in your counter tops and back splash are properly sealed using a waterproof silicone. Silicone will dry out over time, crack and shrink and should be replaced once every three years. Keeping your silicone in good shape will keep kitchen spills where they belong and not running down the walls.
To avoid plumbing disasters in your kitchen, never place hard-to-grind, stringy, fibrous waste, such as poultry skins, banana peels, carrots, celery, or cantaloupe pulp, into the garbage disposer. The disposer can't sufficiently grind these food products and they will clog your sink drain. You should also run cold water down the drain for about 15 seconds before and after using the garbage disposer to flush the waste down the main drain.
DIY plumbing jobs will require that you understand how to solder copper for the lines for the water supply. You can practice this skill so that you will be able to run your lines without worrying about it leaking. Search online for video tutorials that can help you get a handle on how to go about soldering.
Having to wiggle the toilet handle or hold it down to get your toilet to fully flush indicates that the tank parts need to be replaced. Kits that include all of the parts needed can be purchased in any hardware or home improvement store to easily do the repair yourself.
The water heater in your home needs to have regular flushing to its plumbing in order to work properly. There is usually a valve at the bottom of the water heater that a hose can be attached to. Connect a hose to this valve and open it up all the way to flush scale and deposits out of the system.
It is a general rule of thumb that you should replace a water faucet every seven years, even if you do not see anything wrong with it. plumbing installation are not visible to the naked eye, which is why it is so important for them to replaced every so often.
Be sure to check on your hot water pipes annually if they are covered with insulation. Sometimes these hot water pipes can have damaged to them or they could be wearing down and you might not even know it, which is why it is crucial that you check their condition often.
So, after reading and applying the helpful tips listed above, you should feel a bit more at ease in the land of plumbing. You have the tools; it's time to use them. You should feel empowered and ready to begin your plumbing journey to start taking care of your home's plumbing system.
has not yet selected any galleries for this topic.
