|
|
|
|
|
|
|
| Logieberra | profile | all galleries >> ***EQUIPMENT*** >> Old Setups >> Skywatcher Black Diamond 254mm (10") Newtonian | tree view | thumbnails | slideshow |
 1. Stock Holes Too Wide.jpg |
 IMAG0169.jpg |
 11. Slide the Spacers onto the Bolts.JPG |
 12. Spacers Added to the Bolts.JPG |
 13. Another Shot of the Spacers.JPG |
 14. Lots of Compression Now.JPG |
 15. No Mirror Slop Within the Cell.JPG |
 16. Done.JPG |
 2. Stock Holes Too Wide 2.JPG |
 3. Stock Holes Too Wide 3.JPG |
 4. Stock Holes Too Wide 4.JPG |
 5. Stock Holes Too Wide 5.JPG |
 IMAG0171.jpg |
 IMAG0172.jpg |
 IMAG0366.jpg |
 IMAG0366_edit0.jpg |
 IMAG0367.jpg |
 IMAG0410.jpg |
 6. Leave _fectly.JPG |
 7. Insert the Larger Spring Over the Smaller Spring.JPG |
 8. Larger Springs Installed.JPG |
 9. I Used Washers that were Close to the ID of the Large Spring, and Close to the OD of the 3 x Bolts.JPG |
 DSC_8167.JPG |
 DSC_8168.JPG |
 DSC_8169.JPG |
 DSC_8170.JPG |
 DSC_8171.JPG |
 IMAG0042.jpg |
 IMAG0045.jpg |
 IMAG0046.jpg |
 IMAG0050.jpg |
 IMAG0052.jpg |
 IMAG0055.jpg |
 IMAG0057.jpg |
 IMAG0058.jpg |
 IMAG0059.jpg |
 IMAG0060.jpg |
 IMAG0063.jpg |
 IMAG0069.jpg |
 IMAG0071.jpg |
 IMAG0072.jpg |
 IMAG0073.jpg |
 IMAG0075.jpg |
 IMAG0150.jpg |
 IMAG0154.jpg |
 IMAG0155.jpg |
 IMAG0166.jpg |
 IMAG0167.jpg |
 IMAG0168.jpg |
 10. The Washers Stuck Together to Form Spacers - This Keeps the Spring Centred on the 3 x Bolts and No More Warping.JPG |
| comment | share |