Jim Thode |
profile
|
all galleries
>>
Crosscut Saws
>> Raker Swaging Steps
tree view
| thumbnails |
slideshow
Raker Swaging Steps
Jointed (More then normal)
Joint saw and V out Rakers
Cut with Cutoff Saw - Optional
Filing gauge used to lower rakers after jointing
Before swaging - About 0.008" to 0.010" higher then final height
File out V with flat file or use triangular file
Details before swaging
Measuring raker points before swaging
Ready for swaging
Swaging
After swaging about 0.003" to 0.004" higher then final height
Optional sloping filing plate gauge or shape by eye to about 15°
Inside angle should be about 15°
Final raker height - 0.012" in this case
Final raker height is below level of adjacent cutters
Final swaged raker
Simonds520cutting2.dwg
comment
|
share
Type your message and click Add Comment
It is best to
login
or
register
first but you may post as a guest.
Enter an optional name and contact email address.
Name
Name
Email
help
private comment
click on thumbnails for full image