photo sharing and upload picture albums photo forums search pictures popular photos photography help login
Mike Stobbs | all galleries >> Galleries >> Every Now & Then Part V > Vintage Find
previous | next
07-MAY-2011

Vintage Find

I'm a bit of a audiophile and have always had a good system, of which I still use to this day to spin a little old vinyl.
Cruising the online for-sale adds this past weekend I came upon this set of Hitachi HS-430 speakers.
You can read a bit more about them at the end of this post.
While this image really does not show the condition they were in the one on the Left is pretty dirty, while the one on the Right
I have cleaned up.
It amazes me how some sellers just list items and don't even dust them off before trying to sell them.
These are a real find and being of a 1979 vintage in very good shape after a clean up.
The asking price was good to start off but being so dirty and dusty I was able to get an even better deal.
I may be running out of space for all my vintage stuff......LOL

The 3 way speaker system which adopted the metal diaphragm as all the units.
The repetition of the careful numeration, the experiment, and the audition is raising completeness on the theme of high efficiency and extensive dispersibility.

The 30cm metal cone type Woofer (L-3003) is carried in low-pass.
The waveguide-plunger oscillating band has adopted as a cone part the metal cone which had the special feature of quality with little tone-quality failure by humidity transition which carries out an about 1 octave (twice) expansion being stabilized in the orientation of a high region. While attaining metrization by the aluminum alloy of 200micro of board thicknesses, it has the cap cone structure where the rigidity of the whole diaphragm is improved.
Moreover, the original V form gathered edge was adopted as the edge part, the mechanical linearity of the piston vibration of a diaphragm has been improved, the distortion and edge vibration distortion at the time of a large swing were decreased, and it has succeeded in lowering the minimum resonance frequency.

A 5.5cm metal veneer cone type mid range (M-5501) is carried in the mid range.
The aluminum alloy was adopted as well as the Woofer, the gathered edge which can take a swing ±2mm was adopted as the edge, and the minimum resonance frequency is conjointly lowered to 280Hz with the back cavity.

The dome shape tweeter (H-2501) which used the 2.5cm titanium diaphragm is carried in the high region.
The heat-resistant voice coil is adopted as this unit.

An aluminum die-casting frame is adopted as each unit, and the unnecessary oscillation is reduced. .

The three-layer structure particle board is adopted as an enclosure.

The succession good transformation level control is carried in a mid range and high regions.

Scheme 3 ways, 3 loudspeaker bass-reflex scheme, and a bookshelf type
Unit etc. For low-pass: 30cm cone type (L-3003)
For mid ranges: 5.5cm cone type (M-5501)
For high regions: 2.5cm dome shape (H-2501)
Frequency characteristic 35Hz - 20000Hz (-15dB anechoic chamber)
The maximum input 120W (music signal peek)
Impedance 6ohms
Output sound pressure level 92 dB/W/m (8-ohm conversion)
Cross over frequency 700Hz, 4.5kHz
Enclosure internal volume 62L
Dimensions Width 370x height 665x depth of 380mm
Weight 21kg
Canadian List Price in 1979 $800.00 -$1,000.00 pair.


Nikon D700
1/6s f/6.3 at 20.0mm iso1600 full exif

other sizes: small medium original auto
share
Guest 08-May-2011 03:26
Wonderful work. V.
Cindi Smith08-May-2011 03:10
Love the big ol' speakers....I have a pair similar to that and they work great. Great purchase, Mike. I know that you'll enjoy them for a long time to come!
Type your message and click Add Comment
It is best to login or register first but you may post as a guest.
Enter an optional name and contact email address. Name
Name Email
help private comment