![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
"UZ Remote"
Photo 5
The arm is made from a clear polycarb material,
then small screws on the backside hold it to the servo.
I made a ruff cut size and then shaped on grinder.
Note small round knob on end os it can move over the
shutter button.
Thru testing I came up with the angle of the arm
and that it worked best with the arm about a 1/4" off
the button to help push the button down with more force.
See photo 6