photo sharing and upload picture albums photo forums search pictures popular photos photography help login
Spacecommander | all galleries >> Galleries >> dodge > This goes on next.
previous | next
13-MAR-2015

This goes on next.

Motorola Droid RAZR
1/10s f/2.4 at 4.6mm iso107 hide exif
Full EXIF Info
Date/Time13-Mar-2015 21:03:09
MakeMotorola
ModelDROID RAZR
Flash UsedNo
Focal Length4.6 mm
Exposure Time1/10 sec
Aperturef/2.4
ISO Equivalent107
Exposure Bias
White Balance
Metering Mode
JPEG Quality
Exposure Program
Focus Distance

other sizes: small medium large auto
share
Spacecommander 02-Mar-2018 00:55
Oh, with the current carb springs - you need another one of the support bearings somehow mounted in the middle of the shaft. I wouldn't do that - I'd work on massively reducing the throttle plate spring torsion.
Spacecommander 02-Mar-2018 00:49
No, I have not. Thousands of other projects. The slant 6 really needs an electric fuel pump as the fuel boils out of the single quad now on shutdown. This system would be better There is still one problem with the linkage - even those thick aluminum tabs I made flex and near idle the carbs still don't sync 100%. I would JB weld the aluminum support fingers to a spacer and to the manifold ideally, or figure out a good methodology of reducing the carb throttle plate spring but assuring it closes. I spent a lot of time on this - 2 lousy junky 1bbs would work better but would not make the power and economy of the 400 cfm Carter 4bbl on the 4bbl offy manifold. I do have a Clifford Cthulhu super long ram originally copy. :-) bet that won't even start in the cool temps - the runners are so long. Thanks for the good words.
RJ 22-Feb-2018 05:13
Have you installed these yet, I have a similar set up resdy to go. Love your linkage set up
Type your message and click Add Comment
It is best to login or register first but you may post as a guest.
Enter an optional name and contact email address. Name
Name Email
help private comment