Notes:

Perry: short shreds = best
depends on shape of tooth of
rakers – falls out when
raker comes out; others stick
Raker - tooth toward center = lower
Rakers should be so adjusted
so that you can feel & see
each raker cutting
Set tip of teeth – shinny sides
= deep set
Hard steel saws need less set
In using U anvil it must
be kept up tight against
saw or will break
teeth but it safer &
will not take temper
out of teeth as quick as
other ways
Perry’s set is very small (less then mine)
Atkins setting hammers are 14 oz or less