The MEII Manual states that it is possible to rotate the versa-plate 90 degrees to allow side by side mounting of 2 scopes. However, when rotating the plate there is no room for the pre-installed Bisque cables! This appears to be a design fault. As a quick fix I have installed 2 plates 5 mm thick to create a new channel for the cables. I had to obtain longer bolts to hold the versa-plate to the declination axis. Only 4 bolts are available in this configuration (compared to the normal 6 in the standard position. Software Bisque has stated that they intend to address this issue with a kit for those wishing to rotate the versa-plate.