During some down time I cut off the exhaust and pulled the headers off. The old exhaust system came off the headers, tee'd into one tube that dumped into one muffler and the whole system had cracks and holes all over.

My plan is to build a new dual exhaust system from the headers back that will be made from 2 1/4" tubes feeding into two Flowmaster mufflers then dump out the back. I found some cracks in the headers that I didn't see until I pulled the the headers from the motor. So I welded all the cracks and dropped the headers off at the sandblast shop to get blasted and then to be followed up by some ceramic coating to prevent the rust from coming back and hopefully keep some heat down.