The exclusive speaker system for reproducing HOME THX Cinema which Lucasfilm, Ltd. advocates.
Two sets, center speaker HTS-C2, and surround speaker HTS-S2 consist of two sets and six sets of subWoofer HTS-SWwith built-in amplifier 2 for front speaker HTS-F2.

Front speaker HTS-F2 is a Tallboy speaker of 3 way closed mold which adopted the virtual coaxial scheme, and it carries the tilt feature only for right and left.
The 2.5cm soft dome shape tweeter which used 16cmPP cone Woofer for two pieces and a mid range, and used the neodymium magnet for the 8cm cone type squawker and the high region is carried in low-pass.
The gilding screw type termination corresponding to a banana plug is adopted as a terminal.

Center speaker HTS-C2 is a center speaker of the closed mold by a virtual coaxial scheme. The tilt functionality only for a center is carried and an angle can be adjusted in the 30 upper parts - 15 lower parts.
The unit configuration has the same composition as HTS-F2. Moreover, the gilding screw type termination corresponding to a banana plug is adopted as a terminal.

Surround speaker HTS-S2 has improved a spread of sound with the dipole scheme which is a wall tapestry type speaker and arranged the unit on right and left.
The unit configuration carries two 2.5cm soft dome shape tweeters for 13cmPP cone Woofer in two pieces and a high region low-pass.
The gilding screw type termination corresponding to a banana plug is adopted as a terminal.

SubWoofer HTS-SW2 has improved the bass play with the dual drive scheme which is amplifier built-in and arranged the unit on right and left.

Form	THX Certified Home Theater Standard Speaker System
<Front speaker HTS-F2>
Scheme	3 way, 5 speakers, and sealing scheme - A Tallboy type and a magnetic-shield design (EIAJ)
Using unit	For low-pass: 16cm cone type x2 For mid ranges: 8cm cone type For high regions: 2.5cm dome shape
Frequency characteristic	65Hz - 20kHz
Impedance	6ohm
The maximum input	100W
Output sound pressure level	89dB/2.83 v/m (it applies to THX specification)
Cross over frequency	450Hz, 5kHz
Dimensions	Width 210x height 1000x depth of 257mm
Weight	14.7kg
<Center speaker HTS-C2>
Scheme	3 ways, 5 speakers, a sealing scheme, and a magnetic-shield design (EIAJ)
Using unit	For low-pass: 16cm cone type x2 For mid ranges: 8cm cone type For high regions: 2.5cm dome shape
Frequency characteristic	65Hz - 20kHz
Impedance	6ohm
The maximum input	100W
Output sound pressure level	89dB/2.83 v/m (it applies to THX specification)
Cross over frequency	450Hz, 5kHz
Dimensions	Width 619x height 271x depth of 291mm
Weight	13.1kg
<Surround speaker HTS-S2>
Scheme	2 ways, 4 speakers, a sealing scheme, and a wall tapestry type
Using unit	For low-pass: 13cm cone type x2 For high regions: 2.5cm dome shape x2
Frequency characteristic	80Hz - 20kHz
Impedance	6ohm
The maximum input	100W
Output sound pressure level	83dB/2.83 v/m (it applies to THX specification)
Cross over frequency	2.5kHz
Dimensions	Width 251x height 275x depth of 160mm
Weight	5.5kg
<SubWoofer HTS-SW2>
Form	Amplifier built-in, 1 way, 2 speakers, a sealing scheme, and a floor type
Using unit	For low-pass: 30cm cone type x2
Frequency characteristic	35Hz - 200Hz
Maximum output	120W
Impedance	20kohm
Input sensitivity	80dB/m/100V (it applies to THX specification)
Dimensions	Width 444x height 569x depth of 530mm
Weight	32kg