Here is the grimy reservoir after it is free. Drain, clean, and refill it before you reinstall it. photo

fred harmon | all galleries >> Galleries >> coolant > Here is the grimy reservoir after it is free. Drain, clean, and refill it before you reinstall it.

previous | next


06-JAN-2000

Here is the grimy reservoir after it is free. Drain, clean, and refill it before you reinstall it.

Kodak DX3900
1/30s f/2.8 at 7.3mm with Flash hide exif

Full EXIF Info
Date/Time	06-Jan-2000 23:16:15
Make	Kodak
Model	DX3900
Flash Used	Yes
Focal Length	7.3 mm
Exposure Time	1/30 sec
Aperture	f/2.8
ISO Equivalent
Exposure Bias
White Balance
Metering Mode	average (1)
JPEG Quality
Exposure Program	program (2)
Focus Distance

other sizes: small medium large original auto

previous | next

James		20-Nov-2012 22:14
Thank you for taking the time to document your change. I did my first coolant change today (Nov 2012) on my 2008 GL1800 with confidence after viewing your post/steps. However, I did freak a bit after I pulled the reservoir out the breather tube came down with it and I didn't know what it was or where it was suppose to go. I originally thought it had come lose from somewhere up in the engine area. But after looking in the my manual I found how it fit back through the hose guide and No Problems. thanks again.