 EC New Platinum Light Kit |
 EC New Platinum Light Kit |
 New EC Aux light kit with mounts and tool |
 OEM Honda switch |
 Here is the supplied tool for melting holes in the cowl for the springs |
 Fishing the wire behind the frame with a coat hanger |
 Hook the wire and pull it back through |
 The new lights push flush to the cowl against the four supports |
 EC Lens protective fime |
 Lens protective film |
 Side view of lights in the new mount |
 Mount in position in cowl |
 Melting hole for springs |
 Springs in place |
 Positioning springs on light |
 All four springs attached |
 Here you can see both lights in place |
 Front view. Make sure the word TOP on the top of the light is at the top of the cowl |
 Both lights installed |
 Completed installation |
 Here is a look at the Electical Connection 55 watt aux light and Cee Baileys protector. |
 Ec Lights with Cee Baileys Amber lens covers |
 Ec Lights with Cee Baileys Amber lens covers |
 Aux light and low beams on |
 Aux light and low beams on |
 High beams and EC aux lights |
 Garmin GPS 176 mounted with AutoMount |
 Here is a look at what is left of a highway peg mount that scraped and resulted in a riders death. |
 Tulsa Windsheild Cleaning Kit |
 Old low beam relay circuit |
 Proposed (untested) latch relay circuit for low beams and fog lamps |
 Alternate FOG relay wiring |
 Adhesive magnetic strip tape (found at Tractor Supply) |
 A thin stip applied to a Cee Baileys lens cover |
 Another strip is applied to the inside of the cowl (look close) |
 Lens cover in place. Notice gasket like fit of the cover to the cowl |
 Lens Cover in place |
 Homemade clamp |
 Hole drilled and small screw inserted |
 Clamp mounted |
 Inside view of clamp |
 Cover Mounted |
 Second clamp added |
 left side |
 Nuts fastened to clamps |
 charging system |
 ECLensHolder 007a.JPG |
 ECLensHolder 004a.JPG |