|
|
|
|
|
|
|
| fred harmon | profile | all galleries >> Galleries >> autocom | tree view | thumbnails | slideshow |
 Angel approves |
 Autocoms new Pro-7 Sport kit and acessories |
 New Pro 7 Sport kit |
 Technical documentation |
 Lead, adapters, headsets, and more leads |
 Autocom M1 mounted in pocket |
 wires routed though back of pocket by seat |
 FRS interface lead routed to front of bike using extension up to Kenwood FRS radio |
 RML switch mounted on bar |
 Autocom headset lead replaced OEM lead |
 Front Autocom headset lead routed using straight extension lead |
 I cut a 1 inch hole in the back panel for the cords with a hole saw |
 Here is a look inside the CD cavity with the hole cut |
 I used some stiff foam to fashion a plug for the hole |
 Here I am threading the connectors and cords through the hole |
 I used velcro to attach the Autocom to the back wall of the cavity and the foam plug is shown in place |
 Here is a look at the foam plug installed with wires routed from the seat side of the bike |
 GL1800 to Autocom adapter. One end plugs into the rear GL1800 headset lead and the other into the music input. |
 100_0971a.JPG |
 100_0972a.JPG |
 100_0973a.JPG |
 100_0974a.JPG |
 100_0975a.JPG |
 100_0976a.JPG |
 100_0977a.JPG |
 100_0978a.JPG |
 100_0979a.JPG |
 100_0980a.JPG |
 100_0984a.JPG |
 100_0987a.JPG |
 100_0989a.JPG |
 100_0996a.JPG |
 100_0997a.JPG |
 100_1000a.JPG |
 100_1002a.JPG |
 100_1003a.JPG |
 100_1005a.JPG |
 100_1007a.JPG |
 100_1010a.JPG |
 100_1011a.JPG |
 100_1012a.JPG |
 100_1014a.JPG |
 100_1015a.JPG |
 100_1016a.JPG |
 100_1017a.JPG |