|
|
|
|
|
|
|
| |
| 19-OCT-2006 | |
This seems to be the most likely messed up area. #8 is a strip of 2 mm thick foam approximately 7 mm wide and 7 cm long
adhered over rivets and the latch plate. I installed three short pieces of 2 x 2 mm foam strips at #9, #10 & #11 to fill in
the gaps; #9 is about 16 mm long, #10 is about 22 mm, and #11 is about 18 mm long. The back pictured is NOT the one I worked
on. Please note I have had my SQ-A only a short time and am no way any sort of expert.
| Full EXIF Info | |
| Date/Time | 19-Oct-2006 23:45:44 |
| Make | Canon |
| Model | Canon PowerShot A80 |
| Flash Used | No |
| Focal Length | 7.8 mm |
| Exposure Time | 1/125 sec |
| Aperture | f/2.8 |
| ISO Equivalent | |
| Exposure Bias | |
| White Balance | |
| Metering Mode | matrix (5) |
| JPEG Quality | |
| Exposure Program | |
| Focus Distance | |