![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Scans of some test results for pre-flashing the Arista.EDU Ultra RC paper (Grade #2) In the sequences,
the numbers are seconds and those preceded by a '+' are additional exposure. The numbers in parentheses
are accumulated total. As there was concern that multiple short exposures might differ from one continuous
exposure due to lamp warmup time, the two shot strip at the bottom was done with two separate full length
exposures. These were all done under an enlarger head set for 14 inch square printing from a 2.25 square
negative (lens approximately 24 inches above the base, and the enlarging lens set to f/32. Pre-flashing is
used to expose the paper to bring up the threshold and reduce contrast prior to shooting a scene. There is no
likelihood whatsoever that these results could be universal, even for the same paper on a different enlarger.