![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Day 6 & 7: Finishing of Lugs & Bamboo Surfaces
First a thin layer of slow-set epoxy was brushed on all carbon areas to create a smooth, hard surface. After thorough curing overnight, surface was lightly scuff sanded to remove any stiple bumps, then a coat of polyurethane was applied to provide UV protection to the epoxy (which will degrade without it). A full 5 coats was applied over a few days to achieve a high-gloss, protective layer.
The bamboo was scuffed with steel wool and then treated with Teak Oil, which is basically a varnish that penetrates into hard wood before curing to water & UV resistant, natural looking finish.
Copyright Tornado