#1 BEST OF SHOW! |
#2 BEST OF SHOW (2) |
#3 Jim Moyer, Best of Show! |
#4 Six cylinder in-line and Atkinson cycle |
#5 Dave Clymer |
#6 My table |
#7 Earl Wilms |
#8 Pair of nice PM Research steam models |
#9 Thompson and Odds & Ends engine |
#10 Bob Kipp |
# 11 Bob Kipp (2) |
#12 Snow Tandem Engine |
#13 Snow Tandem Engine (2) |
#14 Six cylinder in-line engine and nice John Deere tractor model |
#15 Six cylinder in-line and nice Perkins |
#16 Ralph Milam's real nice 1895 Mery |
#17 Julien, to the left a Sombart and finally a really nice IHC screen cooled |
# 18 more of Ralph Milam's engines |
# 19 Sombart engine |
# 20 another view of the Sombart |
# 21 Some of Ralph Milam's Stirling Fans |
# 22 Rider/Ericsson Hot Air Pumping engine |
# 23 Three Cylinder Fairbanks/Morse with generator |
# 24 Another shot of Gordon's Fairbanks, plus his Otto and Langen |
# 25 more of Gordon Williamson's models |
# 26 All the way from Boise |
# 27 Dave Otto with his fans and Canfield |
# 28 another fellow from Boise |
# 29 more of Max Morgan (2) |
# 30 Max Morgan (3) |
# 31 Max Morgan (4). |
# 32 Wyvern (right) and Red Wing hopper cooled (on left) |
# 33 more by Larry Smith |
# 34 second shot of the Red Wing and the Wyvern |
# 35 well, they are nice - how about one more look? |
# 36 how about a second look at these two? |
# 37 nice engines by Larry Derry |
# 38 (left) Gearless Hit and Miss, (center) R & V, (right) "Red Devil" or Cavanaugh |
# 39 Rocky Rockwell's 'stable' of nice engines. |
# 40 Root and Vandervort vertical engine |
# 41 More of Rocky's engines |
# 42 Another shot of the R&V tower cooled. |
# 43 Rocky's castings for the vertical R&V |
# 44 castings for a nice generator. |
# 45 Nice Baker Ball Monitor engine and an IHC screen cooled |
# 46 Fairbanks Morse model "N" engine castings, scaled down from a 25 hp |
# 47 Tom Stuart's Fairbanks Morse Model N with screen cooling |
# 48 another view of the Fairbanks Morse tractor |
# 49 A really nice 1/4 scale Galloway built by Tom Stuart |
# 50 Associated Hired man (air cooled) |
# 51 Aeromotor by Tom Stuart |
# 52 Fairbanks Morse tractor |
# 53 Marion by Lone Star Engine Works |
# 54 Ball Baker Monitor by Lone Star Engine Works |
# 55 Aeromotor by Lone Star Engine Works |
# 56 Real nice dividing head and a great looking roller. |
# 57 making Skew Gears on the lathe, by Alan Suttie |
# 58 model Hay Baler |
# 59 Ball Baker Monitor engine and an Root & Vandervort hopper cooled |
# 60 a closer look at a Ball Baker Monitor built from Lone Star castings |
# 61 one more closeup of the new Ball Baker Monitor |
# 62 A GREAT Snow Tandem Engine by Ron Bickler |
# 63 More of Ron Bickler's display |
# 64 A closer look at Ron's buzz saw Red Devil |
# 65 Emerald Valley's table |
# 66 more of the Emerald Club members displays |
# 67 Some nice models by Carl Felty |
# 68 |
# 69 some nice models by Bob Eaton |
# 70 some of Gary Hart's stable |
# 71 more of Gary Hart's engines |
# 72 The last of Gary Hart's models and the beginning of Charlie Stark's |
# 73 More models by Charles Stark |
# 74 Al Pohlpeter's steam engine |
#75 several nice engines by Jerry Pontius |
# 76 Bill Bartram |
# 77 Bill Bartram (2) |
# 78 Some nice models by Paul Lanham |
# 79 more of Paul Lanham's models |
#80 Bob Grove |
# 81 Pantograph |
# 82 Tom Hammond's GEAR HOBBER |
# 83 another view of the Gear Hobber |
# 84 getting everything set up ..... |
# 85 now cutting a gear on the new hobber |
# 86 The finished gears Tom has made! |
#87 some nice models by Arnold Hoke |
#88 Another new Snow Tandem Engine plus a Fairbanks Morse Model "N" |
# 89 A few more of Thomas Armstrong's engines. |
#90 some really nice models by David Palmer |
#91 A few more of David Palmer's prize winning models |
# 92 A very nice Corliss and a Coles Hit and Miss |
#93 Root and Vandervort hopper cooled and a Red Devil |
# 94 Several nice Stirling hot air engines. |
# 95 A nice IHC screen-cooled model by Dale Petty |
# 96 1/4 scale Galloway and a Red Devil, built by Dale Petty |
# 97 A little closer view of Dale's "Red Devil" and 1/4 scale Galloway |
# 98 "FRISCO Standard" 2 cylinder by Shelf Pet Models |
# 99 The "Red Devil" by Shelf Pet Models |
# 100 Another Red Devil to the left, and a Stickney to the right |
#101 A "real" Stickney engine, owned by the Banke's |
# 102 The full sized Stickney from the other side |
# 103 NO, YOU DIDN'T SEE THIS ONE AT GEARS ! |
# 104 some Kansas City Lightning ignition castings |
# 105 more KCL ignition castings |
# 106 some of the KCL molds |
#107 more KCL molds and resulting castings |
# 108 more KCL molds, Cooling Water Tank fittings |
#109 KCL molds, PISTON, 2 required per engine |
# 110 Valve Chamber molds and castings |
# 111 Connecting Rod Bearings |
# 112 KCL molds, These are Mixer parts |
# 113 Governor Parts how about this for complicated? |
#114 How's this for a cylinder casting for the Kansas City Lightning? |
#115 The Debolt display including the new STAR engine |
#116 and here is Mrs. Hughes with a part of the Debolt display |
# 117 The newest of the Debolt line .... the STAR |
# 118 The STAR |
# 119 The Star |
# 120 The STAR |
# 121 The STAR |
# 122 The STAR |
# 123 The STAR |
# 124 Castings for the STAR |
# 125 Martin Model tables |
# 126 Martin Model table (2) |
In Box
|