New cabinet for TV in overhead

The Plan	Kreg kit	to drill consistent pocket screw holes
Top support panel	Current wire passage - will drill a larger access	Overhead panel in place - Test fittings
Test fittings	Test fittings	Construction of base cabinet nearly complete
Starting final install	Final install	Final install
Final install	Final install	Final install
Final install (Glue bottle to add interest...)	Fitting remaining panels	Fitting remaining panels
Fitting remaining panels	Upper left support & wiring box - details	Upper left support & wiring box - details
Upper left support & wiring box - details	Upper left support & wiring box installed	Installing panels
Basic cabinet work done - still needs trim & putty	TV Backer - beginning form...	Lengthing very short wire...
Trim complete; FInishing	Trim complete; FInishing	Trim complete; FInishing
Trim complete; FInishing	Fitting the backer	Top plate, hinge mounted
Top plate refined; trough cut for mount	Mount in place; fully collapsed	Mount in place, partially deployed
Strut Closed - 11 3/4"	Strut Collapsed - 11"	Strut Expanded - 17 1/8"
New TV has a fragile mount points - not sufficient for RV use	Full backer with top supports	Full backer with top supports on a mount designed for much larger TVs
	Backer cut, recess designed for future changes if needed	Painting backer
Painting backer	Paint complete.	Strut support assembly
Strut support assembly with back support	Fitting backer	Final configuration
Final assembly - Backer, struts installed	Final assembly - Backer in closed position	TV installed; in storage position
TV in storage position, door open - ceiling clearance checks	TV deployed in viewing position